User manual

5
3.3
Reading the Alarm-Logfile 44
4. Adapter Software-Updates (Firmware) 46
4.1 Firmwareupdate via Setup-tool 46
4.2 Firmwareupdate via FTP 46
4.3 Firmware flash renewal and recovery 47
4.4 Changing the Adapter’s MAC-Address 48
5. Additional Software 50
5.1 RCCMD 50
5.1.1 Installation 50
5.1.2 RCCMD client as relay station 52
5.1.3 License regulations 52
5.2 gChart 52
5.3 UPS Monitor (UPSMON) 53
6. Accessories - Field of applications 54
6.1 SiteSwitch 4 (SS4) and SiteSwitch 4 AUX (SS4AUX) 54
6.1.1 SS4 Feature overview 55
6.1.2 SS4 Contents 55
6.1.3 SS4 Installation 55
6.1.4 SS4 Operation Error! Bookmark not defined.
6.1.5 SS4 - Technical data 56
6.2 Sensor SM_T_COM 56
6.3 SENSORMANAGER (SensorMan) 57
6.3.1 General information 57
6.3.2 Installation and Network integration 58
6.3.3 SENSORMAN connections 58
6.3.4 Configuration of the SENSORMANAGER 59
6.4 RASMANAGER 60
6.5 LED-Matrix Display 60
6.6 MODBUS / PROFIBUS 60
6.7 UNMS (UPS-Network Management System) 61
7. Troubleshooting – FAQ 63
Appendix 64
A. CS121 - Technical data 64
B. CE- and UL-Certification 64
C. Cable and Circuit board configuration, Pin/AUX-Ports, SensorMan 64
D. MODBUS Interface 68
D.1. General information 68
D.2. Available Modbus Function Codes 68
D.3. Exception Codes 68
D.4. MODBUS Modes in the CS121 M (ASCII and RTU) 68
D.5. UPS Parameter 70
D.6. Bus termination 73
D.7. Configuration 73
D.8. TCP/IP - UDP Ports 73
D.9. MODBUS Cables 74
E. Available Variables of the CS121 74
F. Pin layout of Input-sockets of the SENSORMANAGER unit 75
Table of figures 77