User manual

32
3.2.5.3 Email-Job
Figure 27: HTTP - Job Editor: Email-Job
To configure an Email-job follow the entries in the figure above.
Note: Please ensure that your Email settings in the menu “Email” are valid.
(See also section “Email” above)
Besides text entries, variables can also be integrated into the email from the CS121-adapter.
This may personalize your emails. A list of available variables are documentated in the
appendix (Section E Available Variables of the CS121). Please mind, that the variables are
only getting filled if the event actually occures, not by testing the action. (So simulation is not
possible, you have to create a real alarm to see the full message)
For example please see the figure above: There, the variables #MODEL and
#AUTONOMTIME will be substituted with their current values when the action will be released.
Please notice the syntax, that each variable name must be started with the character # and
must be ended with a <space> character.
Apply your settings and test the Email-job in the “Event Editor” to ensure Email will be
sent.
• Continuous, periodic events:
To define an event job which will be executed continuous, e.g. daily, create a job on the event
„UPSMAN started“, as in the following figure:
Figure 28: HTTP - Job Editor: Continuous event job
3.2.5.4 RCCMD Jobs
RCCMD (Remote Console Command) is the world’s most successful shutdown client for
heterogeneous networks and is the most secure way to establish a UPS multiple server
shutdown sequence today. RCCMD clients are listening to an RCCMD server which is usually
an UPSMAN software, CS121 or any third-party UPS manager which has a license to use
RCCMD. An RCCMD server is found inside any CS121 and is triggering RCCMD clients in
case of alarms. Therefore RCCMD requires such listeners on each client-computer you wish to
forward RCCMD signals. For installation of RCCMD at client-side please see the section in
chapter “Add-on software”.