User guide

7.7 Door reversibility
12
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove
the upper filling and install it on the
opposite side of the grille.
• Remove the pedal hole cover and in-
stall the cover provided in the acces-
sory bag on the opposite side of the
grille.
• Lay down the appliance back side
down on a wooden support.
• Unscrew the handle from the top (1)
and the bottom (2) of the door.
1
34
2
• Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
• Remove the cover (4) on the opposite
side and install the support (3) the cov-
er plate (2) and the hinge (1). Install
the cover (4) on the opposite side.
1
2
3
• Unscrew the lower hinge (1). Move the
pin to the opposite side (2).
• Unscrew and move the pedal to the
opposite side (3).
• Screw on the lower hinge on the op-
posite side.
• Tighten the pin with the adjustment
spanner supplied.
ENGLISH 33