Operation Manual

52
GB
Display and Error Messages
General
If an error message (Err) appears in the dis-
play please wait until the scales switch off.
Then switch them on again to continue using
them. For a complete reset remove the battery
for a moment and then reconnect it.
Messages
• 0.0 kg, 0.0 lb., The weight to be
0: 0 st:lb: measured is too low.
Correct operation is not
possible.
• „Err2“: The calculated body fat/
water percentage ranges
beyond the upper or lower
measuring limit.
• „Err2“: The measurement was
aborted before the measur-
ing process was completed
or it was not possible to
perform measuring.
• „Err“: The indication ‘Err’ (Error)
means that the weight
exceeds 180 kg. Do not
exceed the device’s maxi-
mum load to prevent
damages to the device and
the sensors.
- Place the scales on a flat
and solid surface.
• „LO“: The battery charge is too
low.
Usage and care tips
• Weigh yourself without any clothes or
shoes on before meals and always at the
same hour of the day.
• The balance rounds off weight to the
closest 100 g.
• If you weigh yourself twice and two diffe-
rent values are given, it means that your
weight is comprised between both values.
• Do not immerse the balance in water: the
electronic components can be damaged.
• Remove the batteries if the scales will not
be used for a longer period of time.
• Handle the balance with care, as it is a
precise measuring instrument. Do not drop
it or jump on it.
• Do not load the appliance with more than
180 kg (396,8 lb. / 28,34 st:lb) to
avoid damaging the device.
Cleaning
• Clean the device with a slightly moist
cloth. Make sure that no humidity or
waters seeps into the device!
• Do not use abrasive detergents! These
can damage the casing of the device!
• Use a commercially sold detergent or soap
for cleaning.
• Dry the device well after cleaning with a
dry and soft cloth.
This device has been tested according to
all relevant current CE guidelines, such as
electromagnetic compatibility and low vol-
tage directives, and has been constructed
in accordance with the latest safety regula-
tions. Subject to technical changes without
prior notice!
Technical data
Model: PW 4916 FA
Power supply: 3 x 1.5 V, Typ AAA,
LR03, AM4
Min. / max.
weight load: 0.5 kg
(1,1 lb. / 0,1 st:lb)
– 180 kg (396,8 lb. /
28:34 st:lb)
Net weight of the
scales: 1.85 kg
PW_4916_Bed_Anl_A5_3.qxd 09.10.2007 17:06 Uhr Seite 52