Specifications

34
• Connect the power cable as it is
shown in the figure. This
machine is designed for a single
phase voltage of 230V The power
supply requires only outlets of 13
A fuse and a duble pole isolation
switc with at least 3 mm between
contacts.
INSTALLING THE MACHINE WITHOUT DRAWER
• Lay the U base plate of the
machine on the shelf of the
cabinet.
• Insert the L plates, compensating
for any space. The width of the
housing unit the coffee machine
depends on the thickness of the
cabinet’s sides. six side plates (four
being 2 mm thick and two 1 mm
thick) are provided to compensate
13A