AEG The Dryer MINERVA 25 is a sophisticated household appliance that will soon become an indispensable aid in caring for your clothes. This little brochure will help you to get to know your AEG Dryer.
Please ensure that our AEG Dryer is installed in a well ventilated room. 1t should be possible during drying t open a window or door of to operate & window ventilator. Where ventilation Js insufficient, it is advisable to make provision for direct extraction of the moisturizer air. To this effect your AEG service center can supply as an optical extra a hose which connects to the Dryer. The AEG Dryer may be installed underneath or on top of a table or refrigerator.
5 Remove rear bolts from the base plate of the Dryer. Position the Dryer between the support brackets and hook the bent ends of the bars into the front holes at the bottom of the appliance. Refit the bolts of the base plate trough the holes in the support brackets.
The AEG Dryer is designed for 220 Yo it A. C. A three pin power plug must be connected 1o the thrash-core instated flexible cable and plugged into a drapery earthed power point of not less than 13 amp capacity. The Dryer must not be operated from a 5 amp lighting point. 1363 fused plug is used, it should be fitted with a 10 amp fuse {working load of the Dryer: 2.
Starting Drying time As the drying time depends on the type of material, it is advisable ta sort your clothes into batches, i e. tines and cottons to form one load, leaving synthetics {PERSON, NYLON etc.} with their shorter drying time for the next load. Very delicate articles, such as curtains of synthetic fibers, woolens, ladies’ stockings etc. should not be placed in the Dryer.
washer) that the drying times quoted are not enough, In this case, simply reset the time switch to give the toad an additional priced of at least 15 min. Uneven drying results are due ta overloading.
Your AEG office will be only too pleased to advise you on all masers concerning the AEG Dryer or other. AEG household appliances.
