User manual

D • The programme time
When the programme starts, the time decreases with steps of 1 mi-
nute.
• The delay start
When you press the delay start button, the display shows the delay
start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.
•Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
4
flashes.
•
When the programme is completed.
1)
Only available for Spin/Drain programme.
2)
The symbols appear on the display when the related phase or function is set.
5.4 Start/Pause button
4
Press button
4
to start or interrupt a
programme.
5.5 Delay start button
5
Press button
5
to delay the start of a
programme from 30 minutes to 20 hours.
5.6 Time save button
6
Press the button
6
to decrease the
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
5.7 Extra rinse button
7
Press button
7
to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.8 Stain button
8
Press button
8
to add the stain phase
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
5.9 Spin button
9
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
ENGLISH 9