KFA78DIO EN INDUCTION HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 9 10 14 16 16 17 18 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns Garantie, Garanzia, Guarantee The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions • • • • 5 Do not let cookware boil dry to prevent the damage to cookware and glass . Do not use the cooking zones with empty cookware or without cookware. Do not put the aluminium foil on the appliance. Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened. WARNING! If there is a crack on the surface, disconnect power supply to prevent the electrical shock.
Installation instructions WARNING! Risk of injury from electrical current. Carefully obey the instructions for electrical connections. • • • • • • • The electrical mains terminal is live. Make electrical mains terminal free of voltage. Install correctly to give shock protection. Loose and incorrect plug and socket connections can make the terminal become too hot. A qualified electrician must install the connections in the clamps correctly. Use a strain relief clamp on cable.
Installation instructions Assembly min. 500mm min. 50mm min. 50mm min. 5mm Mounting on the top R 5mm = 600mm 490+1mm 750+1mm = min. 25 mm min. 20 mm min. 38 mm min. 5 mm Integrated mounting min.
Installation instructions R10mm min. 25 mm R5mm 7mm 12mm min. 600mm min. 20 mm min. 5 mm +1 490+1mm 750 mm 514+1mm 774+1mm min. 38 mm min. 5 mm If you use a protection box (the additional accessory1)), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessory may not be available in some countries. Please contact your local supplier.
Product description PRODUCT DESCRIPTION General overview 1 180 300 mm mm 180 145 5 4 mm 1 Induction cooking zone 1800 W, with Power function 2800 W (minimum cookware diameter =145 mm). 2 Induction cooking zone 2400 W, with Power function 3700 W (minimum cookware diameter =210 mm). 3 Control panel 4 Induction cooking zone 1400 W, with Power function 2500 W (minimum cookware diameter =125 mm). 5 Induction cooking zone 1800 W, with Power function 2800 W (minimum cookware diameter =145 mm).
Operating instructions sensor field function It activates and deactivates STOP+GO 10 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - The function operates. The Automatic Heat Up function operates. Power function operates. + digit There is a malfunction. / OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat. / Lock/The Child Safety functions operates.
Operating instructions 11 • You use not correct cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • You do not deactivate a cooking zone or change the heat setting. After some time, comes on and the appliance deactivates. See the table. The times of Automatic Switch Off Heat setting The cooking zone deactivates after 6 hours - - - 5 hours 4 hours 1.5 hours The heat setting Touch the control bar at the heat setting.
Operating instructions Power management The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the power to the maximum level for one cooking zone in the pair. Automatically decreases the power in the second cooking zone to a lower level. The display for the reduced zone change between two levels. Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for only this one time.
Operating instructions • To deactivate the CountUp Timer: set the cooking zone with and touch deactivate the timer. The indicator of the cooking zone goes out. or 13 to Minute Minder You can use the timer as a Minute Minder while the cooking zones do not operate. Touch . Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes. • To stop the sound: touch STOP+GO The function sets all cooking zones that operate to the lowest heat setting ( ).
Helpful hints and tips Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes on, the sound is on. Touch , comes on, the sound is off. When this function operates, you can hear the sounds only when: • you touch • the Minute Minder comes down • the Count Down Timer comes down • you put something on the control panel. Activation of the sounds Deactivate the appliance. Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes on, because the sound is off.
Helpful hints and tips 15 Energy saving • If it is possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it. Öko Timer (Eco Timer) To save the energy, the heater of the cooking zone deactivates before the count down timer signal. The difference in the operation time is depends of the heat setting level and the time you cook. The examples of cooking applications The data in the table is for guidance only.
Care and cleaning CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom. WARNING! The sharp objects and abrasive cleaning agents can cause damage to the appliance. For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners. Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates. To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar.
Environment concerns Problem 17 Possible cause and remedy The Automatic Heat Up function does not operate. • There is still residual heat on the cooking zone. Let the cooking zone become sufficiently cool. • The highest heat setting is set. The highest heat setting has the same power as the Automatic Heat Up function. The heat setting changes between two levels. The Power management is activated. See the section Power management. The sensor fields become hot.
Garantie, Garanzia, Guarantee environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. Packaging material The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc.
zia o dello scontrino d’acquisto) Nella garanzia sono comprese le spese di manodopera, di viaggio e del materiale. Dalla copertura sono esclusi il logoramento ed i danni causati da agenti esterni, intervento di terzi, utilizzo di ricambi non originali o dalla inosservanza delle prescrizioni d’istallazione ed istruzioni per l’uso.
www.aeg.
