Specifications

Maintenance
All models of the AVITEQ connector sets are, in general, maintenance free. In dusty
environments, however, dust can penetrate and collect. This can result in deterioration of
the cooling system for the control electronics and short ciruits as a result of soiled strip
conductors.
Check the following at regular intervals:
 Has dust penetrated? Determine the cause so that measures can be taken to avoid
the problem in the future! Clean the connector set by vacuuming the dust layer, e.g.
with an industrial vacuum cleaner.
 Depending on the amount of dust in the area, it may be necessary for the ope| rator
to define a suitable cleaning interval.
NOTE: When cleaning with compressed air, note the in-house regulations regar-
\ding the raising of dust!
DANGER! Raised dust can mix with air and form an explosive dust-air mixture.
Take appropriate measures to eliminate the risk of explosions!
DANGER! When the connector set is connected to mains, dangerously high voltages
are present inside the connector set. Touching electrically live compon- [ ents
can be lethal! Before cleaning the connector set, switch off the current! supply
and protect against unintentional switching on, i.e. by colleagues! \ Protect
yourself from accidental contact with nearby electrically live com-1 ponents or
component groups!
NOTE
DANGER
DANGER