Specifications
* 400/500V vibrators can be operated with the
Connector Set SA(E)...-2 on a 400 V or 500V mains
network. A 400/500 V vibrator can be identified by
the "400/500V" specification on the type plate.lf only
"400V" or "500V" is on the type plate, the firing-
angle switch must not be switched over!
Table 5-b
DIP switch 2 to be set by customer
Fixed settings of the lower DIP switches 3 to 8
Use Table 5-c to check that the vibration frequency is set in accordance with
the type plate.
Never
change the setting of the DIP switch without first
consulting with AVITEQ Vibrationstechnik!
Table 5-c
DIP switches 3 to 8 for checkin
g
the vibration fre
q
uenc
y