Specifications

5 Commissioning
5.1 Commissioning with AVITEQ magnetic
vibrators
5.2 Commissioning with vibrators from other
manufacturers
5.3 Information regarding the DIP switch block
Chapter Outline
In general, the connector sets can be operated with either original
AVITEQ vibration conveyor devices or devices from other
manufacturers. This chapter describes the necessary commissioning
steps for both options.
Prerequisite for the commissioning is the completely installed vibration
conveyor device with magnetic drive.
Moreover, all installation work shown and explained in Chapter 4 must
be completed.
Several important settings can be made at the so-called DIP switch
block; the individual functions are explained in Chapter 5.3.