Specifications
4.2 Binding Post Assignment
The following sections 4.2.1 to 4.2.6 explain the binding post assignment on
the connector sets as well as the available options. Read these sections before
you begin wiring, and observe the information regarding electromagnetic
compatibility!
NOTE: The symbol for the control board for each connection diagram is
located in the left margin. An arrow mark in each installation step
helps you locate the binding posts and display or adjustment
elements.
4.2.1 Connecting the magnetic vibrator
The minimum binding post assignment of a magnetic vibrator
• for voltage-regulated operation and
• without external control input
shows Figure 4.3. Binding posts 13 and 14 must be connected by a
bridge.
Figure 4.3
Standard binding post assignment with mains input (binding posts PE. 1 and 2). Magnetic Vibrator
(binding posts 3 and 4) and vibration-width adjuster (binding posts 5.6 and 7)
NOTE