Specifications

Figure 4.1
Panel mounting unit dimensions and hole pattern for securing to vertical vibration-free switching
cabinet walls or installation plates
Weight: 3 kg
Carry out the installation as follows:
 Screw the mounting plates (delivered loose) onto the cabinet as shown in
Figure 4.2.
 Use the hole pattern in Figure 4.2 to orient yourself, and drill the necessary
holes for the fastening screws.
 Hand-fasten the mounting plates to a vibration-free vertical wall or frame.
ATTENTION! Connector sets are vibration sensitive! Do not install on vibrating
components, and under no circumstances to the vibration conveyor device
itself!
ATTENTION!