Specifications

Table 3-a (Continued)
Technical data for Connector Sets SA(E)...-2
SA(E)-FS..-2 SA(E)-GS..-2 SA(E)-HS..-2
Nominal current 25A 23 A 43 A
Maximum power loss in switching
cabinet
75 W 70 W 85 W
NOTE NOTE: The permissible tolerances are, for the mains voltage, ± 10.0 % and,
for the mains frequency, ± 0.5 %.
NOTE NOTE: The vibration frequency is set at the factory prior to delivery and must
not by changed by the customer.
3.4.3 Type Designations
Explanation of the type designation for the VIBTRONIC connector sets
type SA(E)...-2:
NOTE NOTE: As shown in Table 3-a (Technical Data), the connector sets are
designed for various voltage ranges. Please see the type plate for the
voltage range of the connector set.