Specifications

ATTENTION! Unauthorised combinations may result in destruction of the
magnetic vibrator or connector set! Mains voltage, mains frequency and
vibration frequency must be compatible! The nominal current of the connector
set must be the same or greater than the peak current of the magnetic vibrator.
Connect only compatible devices!
2.2 Disposal
2.3.1 Packing Materials
The following materials are used by us for delivering connector sets, depending
on the type of transport.
• Polyethylene foil (PE) for device protection
• Corrugated cardboard for outer and inner packing
• Wooden cases for outer packing
• Paper shavings for filler material
• Styrofoam (Flo-Pack) for filler and damping material.
All packing materials should be disposed of in accordance with local regulations
of the delivery destination.
Cardboard containers and paper packing tapes can be recycled within the RESY
Disposal and Re-utilisation System. Packing foils, tapes and foam foils (if used)
consist of polyethylene (PE), the CFC/HCFC-free padding normally of foamed
polystyrene (PS). These packing materials consist of pure hydrocarbons and
can thus be recycled.
In special cases, we use steel packing bands and wooden cases free of chemical
treatment.
2.3.2 Returning the Device
AVITEQ Vibrationstechnik GmbH takes back connector set types SA(E)...-2,
delivered after 1995, free of charge if delivered to AVITEQ Vibrationstechnik
GmbH, Hattersheim, Germany.
ATTENTION!