Operating instructions

9
EN
Features of Protect B. PRO:
• VI (line-interactive) protection technology
with sinusoidal output voltage
• Microprocessor control for high reliability
and optimum control behaviour
• Overload, short-circuit proof
• Operator-friendly LCD (liquid crystal display) for easier
readability
/ configuration
• State-of-the-art battery management with temperature-
compensated charging characteristics and integrated
protection against deep discharging and overcharging
• Maintenance-free, sealed lead-acid battery system,
hot-swappable
• Emergency Power Off contact for the immediate electronic
switch-off of connected electrical loads
• Separate, manageable output circuit with IEC sockets for
load segmentation
• Intelligent monitoring system with USB and RS232 inter-
faces; expansion slot for expansion cards, e.g. SNMP, can
be used at the same time
• CompuWatch software for shutdown, status indications and
measured values for all common operating systems
(Windows, Mac, Linux etc.)
• Compact construction
/ versatile in use thanks to its combi-
nation tower
/ rack design with rotating liquid crystal display
2.2 System description
The UPS is connected to a safety socket between the public
mains and the electrical loads to be protected. During normal
operating conditions when the Protect B.
PRO is being supplied
with mains voltage, the battery charge rectifier keeps the battery
fully charged.
Electrical loads connected to the Protect
B. PRO are supplied
with power via mains filters in this operating condition. These
filters provide effective protection against mains overvoltage
spikes and high-frequency interference.