Operating instructions

35
EN
Setup options
Indicator in setup menu
(see also Section 7.4, starting on Page 38)
Displayed measured values
The measured values for the following are
displayed in sequence: Input voltage [V AC],
input frequency [Hz], battery voltage [V DC],
output voltage [V AC], output frequency [Hz],
load [%] and internal UPS
/battery temp. [°C]
Indicator for the number of externally
connected battery units (here, none = "00")
Information on the UPS load (electrical load value)
Bar graph for indication of the UPS load:
0-25%, 26-50%, 51-75% and 76-100%
Indication of an active overload
Indication of an electrical load short-circuit
UPS status
Status indication of the manageable output
sockets. Symbol is active, i.e. lights up with
energised output circuit
Pictogram for signaling the silenced internal
signaller
Automatic efficiency-optimised operation
(internal UPS buck
& boost levels deactivated)
Battery symbol indicates an active battery
charger; "CHARGING" flashes with active
battery boost charging
Indicates an active AVR (voltage regul.)
(internal UPS buck
or boost level activated)
Pictogram indicates an active battery
discharge, e.g. in case of a mains failure
or during the UPS self-test