Operating instructions

4 Installation

4.1 Unpacking and checking

The device has been fully tested and checked. Although the

packing and shipping of the device are done with the usual care,

transport damage cannot be fully ruled out.

Transport damage claims are to be lodged with the

transport company!

For this reason check the shipping container for damage upon

receipt. If necessary, ask the transport company to check the

goods and record the damage in the presence of the transport

company employee. Report the damage via the AEG

representative/dealer within 8 days of delivery.

Check the contents of the delivery for completeness:

• UPS Protect B.

PRO

with 750,

1000, 1400, 1800, 2300 or 3000 VA

• 2 base feet and 2 mounting brackets

incl. installation hardware (screws)

• 2 mains connection cables

(1x

hybrid plug as per CEE 7/7 / 1x plug as per BS1363)

• 2 device connection cables of type IEC320 10A

Additionally, 1 device connection cable of type IEC320 16A

with Protect B.

2300 PRO and Protect B. 3000 PRO

• 2 communication cables (USB & RS232)

• Management software "CompuWatch" on CD

• Safety and operating instructions

External battery modules include the following with delivery:

• External battery unit Protect B.

BP PRO

for Protect B.1000

PRO, B.1800 PRO or B.3000 PRO

• Base foot expansion and 2 mounting brackets

incl. installation hardware (screws)

• Special battery connection cable and detection cable

• Safety instructions