Technical data

Maintenance and Troubleshooting – Troubleshooting

6–4

Adjustment: the maximum height at the funnel outlet should be equal to the height

of the trough.

Transported material freezes or sticks

Condensation may occur on metallic surfaces of working unit and

small conveyor unit following abrupt changes in temperature. Depen-

ding on the material transported, this may result in the formation of

lumps, material sticking to the surface, or even to material freezing to

the surface at low temperatures.

Remedy: Encapsulate the conveyor unit. If there is sufficient insulation, tempera-

ture changes are reduced and condensation is avoided.

NOTE