Technical data

0–3

Safety Notes

You will find three different types of symbols in this operating manual which are

intended to point out important information:

The DANGER warning describes procedures or conditions which could have dan-

gerous or even life-threatening consequences for the person installing or using the

equipment.

You will find this information associated with procedures in which a danger of

damage to equipment exists. This damage could also result in injury to personnel

(e.g., from a fire!)

Notes provide information about individual procedures. Notes explain circum-

stances, clarify terminology or provide tips for simplifying processes or procedu-

res.

Although the conveyor devices were developed taking all safety measures into

account, errors are possible. In the interest of your safety and that of your col-

leagues, observe the following information:

When the unit is connected to the mains, a lethal voltage is present inside the con-

troller and the small conveyor unit. Touching electrically live components can be

lethal! Before switching on mains power, ensure that no live parts can be touched.

Close the controller’s lid!

Inadequate installation may cause the conveyor device to fall down possibly

causing injuries. Ensure that the rubber feet on the chassis are bolted on tight!

Non-sterile conveyors in applications of the pharmaceutical and food processing

industries represent a significant health risk through the spreading of germs. For

this reason, only conveyors in special paintwork with sterilizable surface may be

used in such applications.

DANGER!

ATTENTION!

NOTE

DANGER!