Technical data

Selection and Installation of the Controller – Cabling
4–6
4.4 Cabling
When you install the cable between the small conveyor drive and the controller,
please observe the following:
F
The cable length must not exceed 40 m.
F
Only use cable whose insulation suits the special environmental conditions.
For pharmaceutical and food processing applications, you must choose steri-
lizable insulations.
F
In the proximity of the small conveyor drive, run the cable in such a way that
contact with vibrating parts is impossible.
Short circuits and electric shock may result if insulation is damaged by rubbing!
Connecting cables must never come in contact with vibrating parts - otherwise,
the insulation may get damaged.
Run the cables in a way that excludes this danger!
F
Avoid cable loops! Shorten cables if required.
DANGER!