Technical data

Operating Manual for AViTEQ Small Conveyor Units KF and KR

3–3

Drive Attachment

from above

Attachment to

face

Attachment to side

(special version R2)

KF 0,3 M4 (4...10 mm) - M4 (4...8 mm)

KF 0,5 M5 (4...10 mm) - M5 (4...10 mm)

KF 0,7 M6 (5...14 mm) - M6 (5...14 mm)

KF 0,9 M8 (6...16 mm) - M6 (5...14 mm)

Table 3.2 Working unit attachment bolt size for small conveyor drives

The maximum depth that the bolts may reach within the small conveyor

unit’s attachment plate is specified in parentheses.

Screw type Tightening Torque (Nm)

M 4 2.4 Nm

M 5 5 Nm

M 6 8 Nm

M 8 20 Nm

Bolt quality 8.8

Table 3.3 Tightening torques for working unit attachment bolts

Figure 3.1 Working unit attachment: holes on the side (drive on left)

and on top (drive on right)