Technical data

Operating Manual for AViTEQ Small Conveyor Units KF and KR

2–1

2 Extent of Delivery, Packing,

Disposal

Chapter Outline

For storage and transport, certain measures must be observed in order to prevent

damage to the units.

The contents of the delivery must be checked after unpacking. The packing mate-

rial should be disposed of properly.

What do you do with AViTEQ small conveyor units when you no longer need

them? The return guarantee.

2.1 Transport and storage

Delivery: small conveyor unit and accessories are delivered in appropriate

packing so that they reach their destination without damage.

If the outer packaging shows heavy damage that could indicate damage to the

contents, contact the forwarding agent! In further proceedings, note the forwar-

ding agent’s General Conditions of Business. Otherwise, formalities may jeopardize

your entitlement to compensation!

Storage: unless special agreements concerning packing and storage have

been made, the units, either packed or unpacked, must be stored and trans-

ported under "normal" conditions. This means: in enclosed rooms with ambi-

ent temperatures between -10 and +45 °C and a relative humidity not

exceeding 80 %.

When transporting the unpacked unit, it is easy to avoid damage:

F Always grab the small conveyor drive from the underside if you wish to carry

it! Never lift it by the working unit!

F Avoid contact with pointed or sharp (metallic) objects that could damage the

protective lacquer coating!

F Always place the unit onto a secure support base and position, such that the

unit cannot tip or fall down.

Transporting and storing the units under inappropriate conditions may cause per-

manent damage. Such damage may not be detectable from the outside. AViTEQ

declines any responsibility in this case and is not liable for the consequences.

NOTE

ATTENTION!