Technical data

We are Partners. – Installation and operating personnel
1–6
Connection to controllers
The small conveyor units must only be connected to the AC mains via special VIB-
TRONIC controllers. A suitable controller exists for every version of the small con-
veyor drives and units.
Other control and connection options are not included.
If a small conveyor drive is connected directly to the AC mains or

to an unsuitable
controller, it may be destroyed. Only use the appropriate controller!
Service, Repair and Maintenance
Neither the small conveyor unit nor the controller contain components that may be
maintained or repaired by the installer or user. Do not open the units under any cir-
cumstances. In case of a fault, send them back to us if you would like to have
them repaired.
If mains voltage is applied, a lethal voltage is present inside the controller and the
small conveyor drive. Touching electrically live components can be lethal! Before
switching on mains power, ensure that no live parts can be touched. The control-
ler’s lid should be closed!
1.4 Installation and operating personnel
Persons involved with installation, commissioning, assembly, disassembly, adjust-
ment or maintenance must have read and understood this operating manual in its
entirety; in particular the safety notes. If you have any questions, we are happy to
help you!
All work on the small conveyor unit must be undertaken by qualified skilled per-
sonnel (electrotechnically qualified or trained person according to IEC 364 and
DIN EN 60204-1).
Maintenance on the small conveyor units may only be carried out by service per-
sonnel authorized and trained by AViTEQ Vibrationstechnik GmbH, Frankfurt.
AViTEQ Vibrationstechnik GmbH, Frankfurt, is not liable for injuries or damage to
property if this is not observed.
ATTENTION!
DANGER!
Prior to installation and/or
commissioning, you must
have acquainted yourself
with all details and connec-
tion options of the small con-
veyor unit.