IPE84571FB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION...........................................................................................8 5. DAILY USE.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 3. INSTALLATION WARNING! Refer to Safety chapters. 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. Serial number ........................... 3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. 3.
www.aeg.com 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 3 1 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 2 4.2 Control panel layout 6 7 5 4 3 8 2 1 9 10 11 To see the control panel and the zone positions activate the appliance with Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
ENGLISH Sensor Function field Comment PowerSlide To activate and deactivate the function. Control bar To set a heat setting. 10 PowerBoost To activate the function. 11 Lock / Child Safety Device To lock / unlock the control panel. 8 9 - 4.3 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using.
www.aeg.com Heat setting The hob deactivates after 5 4 hours 6-9 1.5 hours • The activation of the function depends on the number and size of pots. 5.3 The heat setting Touch the control bar at the desired heat setting or move your finger along the control bar to set or change the heat setting for a cooking zone. 5.5 PowerBoost Once you place a pot on the cooking zone and set the heat setting, it remains the same for 50 seconds after you remove the pot.
ENGLISH When the time comes to an end, a signal sounds and flashes. To stop the signal, touch . To deactivate the function: touch indicators and . The come on. Use or to set on the display. Alternatively, set the heat level to 0. As a result, a signal sounds and the timer is cancelled. Minute Minder You can use this function when the hob is activated but the cooking zones do not operate. Place a pot on a cooking zone to see symbol. 1. Touch to activate the function.
www.aeg.com The display comes on and goes out. 2. Touch or for 3 seconds. comes on. 3. Touch of the timer to choose one of the following: • When the function is set to hear the sounds only when: you can you touch Minute Minder comes down Count Down Timer comes down you put something on the control panel. 5.11 Automatic modes - the sounds are off • - the sounds are on 4. Wait until the hob deactivates automatically to confirm your selection.
ENGLISH accidental activation of the fan for the next 30 seconds. To operate the hood directly on the hood panel deactivate the automatic mode of the function. Operating the fan speed manually You can also operate the fan from the hob manually. Touch when the hob is active. 13 This deactivates automatic operation of the function and allows you to change the fan speed manually. When you press , you raise the fan speed by one.
www.aeg.com > 160 mm 6.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. The sides of the zones which operate together in this mode light up, and they are linked with shorter illuminated lines. You can set the heat setting for each zone separately. Use two left side control bars. 6.3 FlexiBridge Big Bridge mode To activate the mode touch until you see the correct mode indicator .
ENGLISH 15 6.4 FlexiBridge Max Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects all sections into one cooking zone. To set the heat setting use any of the two control bars on the left side. Correct cookware position: To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller than three sections the control bar blinks and after 2 minutes the zone switches off. Incorrect cookware position: 6.
www.aeg.com • If you place the pot in the front position, lights up on the control panel. The control bar displays the default heat setting . • If you place the pot in the middle lights up on the control position, panel. The control bar displays the default heat setting . • If you place the pot in the rear position, lights up on the control panel. The control bar displays the default heat setting . • To change the default heat setting use left front control bar.
ENGLISH 7.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (a sandwich construction). • whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction). • humming: you use a high power level. • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction. 17 count down timer sounds.
www.aeg.com Heat setting Use to: Time (min) Hints 9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. Boil large quantities of water. PowerBoost is activated. 7.5 Hints and Tips for Hob²Hood When you operate the hob with the function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob control panel. • Do not interrupt the signal between the hob and the hood (e.g.
ENGLISH 8.2 Cleaning the hob • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat 19 stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent.
www.aeg.com Problem Possible cause Remedy An acoustic signal sounds You put something on one and the hob deactivates. or more sensor fields. An acoustic signal sounds when the hob is deactivated. Remove the object from the sensor fields. The hob deactivates. Remove the object from the sensor field. You put something on the sensor field . Residual heat indicator does not come on. The zone is not hot because it operated only for a short time or the sensor is damaged.
ENGLISH 21 Problem Possible cause Remedy The control bar blinks. There is no cookware on the zone or the zone is not fully covered. Put cookware on the zone so that it fully covers the cooking zone. The cookware is unsuitable. Use suitable cookware. Refer to "Hints and tips". The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to "Technical data". FlexiBridge operates.
www.aeg.com 10. TECHNICAL DATA 10.1 Rating plate Model IPE84571FB Typ 62 D4A 21 AA Induction 7.35 kW Ser.Nr. ................. AEG PNC 949 597 527 00 220 - 240 V / 400 V 2N 50 - 60 Hz Made in Germany 7.35 kW 10.
ENGLISH Energy consumption per cooking zone (EC electric cooking) Middle rear Right front 190.8 Wh / kg 194.2 Wh / kg Energy consumption of the Left cooking area (EC electric cooking) 187.0 Wh / kg Energy consumption of the hob (EC electric hob) 189.2 Wh / kg EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 11.2 Energy saving You can save energy during everyday cooking if you follow below hints.
867350056-A-482018 www.aeg.
