IPE64571FB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. CONDITIONS OF USE................................................................................................ 4 3. SAFETY INSTRUCTIONS.............................................................................................4 4. INSTALLATION............................................................................................................7 5.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector.
ENGLISH • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 7 4. INSTALLATION WARNING! Refer to Safety chapters. 620 280 4.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. 590+1 Serial number ........................... 4.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. min. min. 12 60 4.
www.aeg.com 5. PRODUCT DESCRIPTION 5.1 Cooking surface layout 3 1 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 2 5.2 Control panel layout 6 7 5 4 3 8 2 1 9 10 11 To see the control panel and the zone positions activate the appliance with Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
ENGLISH Sensor Function field Comment PowerSlide To activate and deactivate the function. Control bar To set a heat setting. 10 PowerBoost To activate the function. 11 Lock / Child Safety Device To lock / unlock the control panel. 8 9 - 5.3 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using.
www.aeg.com Heat setting The hob deactivates after 5 4 hours 6-9 1.5 hours 6.3 Using the cooking zones CAUTION! Do not place hot cookware on the control panel. There is a risk of damage to the electronic parts. Place the cookware in the centre of the selected zone. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. remove the pot. The control bar blinks for the second half of that time.
ENGLISH Touch to activate the function for the cooking zone. The function deactivates automatically. For maximum duration values, refer to "Technical data". The function starts automatically after 4 seconds. When you set the function, you can remove the pot. When the time comes to an end, a signal sounds and flashes. Touch stop the signal. to 6.7 Timer To deactivate the function: touch Count Down Timer indicators Set the heat setting for the appropriate cooking zone and then set the function. 1.
www.aeg.com The control bars disappear. Deactivate the hob. When you deactivate the hob, the function is still active. To deactivate the function for only one cooking time: Activate the hob with . comes on. Touch until signal sounds and the indicator comes off. The control bar appears. Set the heat setting within 50 seconds.You can operate the hob. When you deactivate the hob with the function is still active.
ENGLISH Auto- Boiling1) Frying2) matic light Mode H6 On Fan speed 2 vates the fan speed in accordance with the automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature. Changing the automatic mode 1. Deactivate the appliance. for 3 seconds. 2. Touch The display comes on and goes off. 3. Touch for 3 seconds. 4. Touch on.
www.aeg.com When you switch between the modes the heat setting is set back to 0. Diameter and position of the cookware zones which operate together in this mode light up, and they are linked with shorter illuminated lines. You can set the heat setting for each zone separately. Use two left side control bars. Choose the mode applicable to the size and the shape of the cookware. The cookware should cover the selected area as much as possible.
ENGLISH 15 Use two left side control bars. Correct cookware position: Correct cookware position: To use this mode you have to place the cookware on the three connected sections. If you use cookware smaller than two sections the control bar blinks and after 2 minutes the zone switches off. To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller than three sections the control bar blinks and after 2 minutes the zone switches off.
www.aeg.com position. You can place the cookware in the front, middle or rear position. If you place the cookware in the front you get the highest heat setting. To decrease it, move the cookware to middle or rear position. • If you place the pot in the middle position, lights up on the control panel. The control bar displays the default heat setting . • If you place the pot in the rear position, lights up on the control panel.
ENGLISH Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone. Refer to "Technical data". 8.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (a sandwich construction).
www.aeg.com Heat setting Use to: Time (min) Hints 6-7 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 7-8 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through. 9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. Boil large quantities of water. PowerBoost is activated. 8.
ENGLISH • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. • Use a special scraper for the glass. The printing on the flexible induction cooking area may become dirty or change its colour from sliding the cookware. You can clean the area in a standard way. 9.2 Cleaning the hob 19 otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
www.aeg.com Problem Possible cause Remedy You cannot select the maximum heat setting for one of the cooking zones. The other zones consume the maximum available power. Your hob works properly. Reduce the heat setting of the other cooking zones connected to the same phase. Refer to "Power management". An acoustic signal sounds You put something on one and the hob deactivates. or more sensor fields. An acoustic signal sounds when the hob is deactivated. Remove the object from the sensor fields.
ENGLISH Problem 21 Possible cause Remedy The diameter of the bottom of the cookware is incorrect for the activated function or function mode. Use cookware with a diameter applicable to the activated function or function mode. Use cookware with a diameter smaller than 160 mm on a single section of the flexible induction cooking area. Refer to "Flexible induction cooking area". Child Safety Device or Lock operates. Refer to "Daily use".
www.aeg.com 10.2 If you cannot find a solution... servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the 11. TECHNICAL DATA 11.
ENGLISH Diameter of circular cooking zones (Ø) Right front Right rear 14.5 cm 18.0 cm Lenght (L) and width (W) of the cooking area Left L 41.8 cm W 24.8 cm Energy consumption per cooking zone (EC electric cooking) Right front Right rear 187.5 Wh / kg 174.6 Wh / kg Energy consumption of the Left cooking area (EC electric cooking) 187.0 Wh / kg Energy consumption of the hob (EC electric hob) 184.
www.aeg.com 3. 4. 5. 6. 7. modify in any way) other rights and remedies under a law to which the Appliances or services relate, including any non-excludable statutory guarantees in Australia and New Zealand. Warranty Period: Subject to these terms and conditions, this warranty continues for in Australia for a period of 60 months and in New Zealand for a period of 60 months, following the date of original purchase of the Appliance.
ENGLISH replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. ‘Acceptable quality’ and ‘major failure’ have the same meaning as referred to in the ACL. 10.
www.aeg.
ENGLISH 27
867350543-B-052019 www.aeg.
