User manual

Sym-
bol
Comment
10
Pause To activate and deactivate the function.
11
0 - 9 - To show the current heat setting.
12
FlexiBridge To switch between three modes of the function.
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
III / II / I There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
5. QUICK GUIDE
5.1 Using the display
• Only the backlit symbols can be used.
• To activate a given option, touch the
relevant symbol on the display.
• The selected function is activated
when you remove the finger from the
display.
• To scroll the available options, use a
quick gesture or drag your finger
across the display. The speed of the
gesture determines how fast the
screen moves.
• The scrolling can stop by itself or you
can stop it immediately if you touch
the display.
• You can change most of the
parameters shown on the display
when you touch the relevant symbols.
• To select the required function or
time you can scroll through the list
and / or touch the option you want to
choose.
• When the hob is activated and some
of the symbols disappear from the
display, touch it again. All the symbols
come back on.
• For certain functions, when you start
them, a pop-up window with
additional information appears. To
deactivate the pop-up window
permanently, check before you
activate the function.
• Select a zone first to activate the timer
functions.
Symbols useful for display navigation
To confirm the selection or setting.
To go back / forwards one level in
the Menu.
To scroll up / down the instructions
on the display.
To activate / deactivate the op-
tions.
To close the pop-up window.
To cancel a setting.
5.2 Menu structure
Touch to access and change the
settings of the hob or activate some
functions. The table shows the basic
Menu structure.
ENGLISH
9