FFB72600PM FFB72600PW USER MANUAL EN User Manual Dishwasher
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................6 4. CONTROL PANEL....................................................................................................... 7 5. PROGRAMMES...
ENGLISH 3 manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • • • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not leave the appliance with the door open, to avoid a tripping hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. The appliance is to be connected to the water mains using the new supplied hose-sets.
ENGLISH installation. Make sure that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. 2.3 Water connection • Do not cause damage to the water hoses. • Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
www.aeg.com 3.
ENGLISH 4. CONTROL PANEL 1 2 8 1 2 3 4 5 On/off button Program button Programme indicators Display Delay button 3 4 7 5 6 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing phase operates. Drying phase. It comes on when the drying phase operates. End indicator. TimeSaver indicator. XtraDry indicator. Rinse aid indicator.
www.aeg.com 5.
ENGLISH 9 5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) 11.4 0.76 143 7.5 - 12 1.0 - 1.3 99 - 158 12.5 - 14.5 1.4 - 1.7 170 - 190 12 - 14 0.7 - 0.9 82 - 92 10.5 0.9 38 4.0 0.01 14 9.0 - 10 1.1 - 1.3 230 - 250 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.
www.aeg.com 6.2 The rinse aid empty notification • The indicators off. The rinse aid helps to dry the dishes without streaks and stains. • The indicator still flashes. • The display shows the current The rinse aid is automatically released during the hot rinse phase. When rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse aid.
ENGLISH CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. How to deactivate AirDry Make sure the appliance is in user mode. 1. Press Delay. • The indicators 11 and are off. • The indicator still flashes. • The display shows the current setting. = AirDry is deactivated. – – = AirDry is activated. 2. Press Delay to change the setting. 3. Press on/off to confirm the setting. 7.
www.aeg.com How to activate TimeSaver °C for at least 10 minutes during the last rinsing phase. Press Option until the indicator The display shows the updated programme duration. How to activate ExtraHygiene is on. 7.3 ExtraHygiene This option provides better hygiene results by keeping the temperature at 70 Press Option until the indicator The display shows the updated programme duration. is on. 8. BEFORE FIRST USE 1. Fill the rinse aid dispenser. 2. Open the water tap. 3.
ENGLISH 9.1 Using the detergent A B C 13 2. Press Program again and again until the indicator of the desired programme is on. The display shows the programme duration. 3. Set the applicable options. 4. Press Start to start the programme. • The indicator of the running phase is on. • The programme duration starts to decrease with steps of 1 minute. Starting a programme with delay start 1. Press the release button (A) to open the lid (C). 2.
www.aeg.com Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function.
ENGLISH • Make sure that glasses do not touch other glasses. • Put small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not move. • Make sure that the spray arm can move freely before you start a programme. 10.4 Before starting a programme Make sure that: • The filters are clean and correctly installed. • The spray arms are not clogged. • There is dishwasher rinse aid (unless you use multi- tablets). • The position of the items in the baskets is correct.
www.aeg.com 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the upper spray arm We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 5.
ENGLISH 17 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning 4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until it locks into place. • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
www.aeg.com Problem and alarm code Possible solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not start. • Make sure that the appliance door is closed. • Press Start. • If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. • Make sure that the water tap is open.
ENGLISH 19 Problem and alarm code Possible solution The appliance trips the circuit-beaker. • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. • Internal electrical fault of the appliance. Contact an Authorised Service Centre. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes.
www.aeg.com Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid and multi-tablets together.
ENGLISH Voltage (V) 200 - 240 Frequency (Hz) 50 / 60 Wattage (W) 1550-2200 bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Water supply Cold water min 5 °C Capacity Place settings 14 Electrical connection 1) Water supply pressure 1) Refer to the rating plate for other values. 14. INSTALLATION 14.1 Fitting under a counter The plinth of a freestanding appliance is not adjustable. Do not remove the worktop if you want to use the appliance as a freestanding unit.
www.aeg.com If the door does not close correctly, loosen or tighten the adjustable feet to level the appliance. 14.2 Water connection Water inlet hose Connect the inlet hose to a water tap with an external BSP thread spout of 3/4''. For best washing performance it is recommended to connect the appliance to a cold water supply. Energy savings can be made by connecting the appliance to a Solar water system and using economy options, however the water temperature must not exceed 60° C.
ENGLISH 23
117881821-A-352017 www.aeg.
