FEE92800PM USER MANUAL EN User Manual Dishwasher
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................6 4. CONTROL PANEL....................................................................................................... 7 5. PROGRAMMES...
ENGLISH 3 damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. The ventilation openings in the base (if applicable) must not be obstructed by a carpet. Some dishwasher detergents are strongly alkaline.
ENGLISH new devices fitted (water meters, etc.), let the water flow until it is clean and clear. • Ensure that there are no visible water leaks during and after the first use of the appliance. • The water inlet hose has a safety valve and a sheath with an inner mains cable. 5 • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Internal light WARNING! Risk of injury.
www.aeg.com 3.
ENGLISH 4. CONTROL PANEL 1 2 8 1 2 3 4 5 On/off button Program button Programme indicators Display Delay button 3 4 7 5 6 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing phase operates. Drying phase. It comes on when the drying phase operates. End indicator. TimeSaver indicator. XtraDry indicator. Rinse aid indicator.
www.aeg.com 5.
ENGLISH Programme 7) Degree of soil Type of load Programme phases • Normal soil • Prewash • Crockery and cut- • Wash 50 °C lery • Rinses • Dry 9 Options • XtraDry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes). 2) The appliance senses the degree of soil and the quantity of items in the baskets .
www.aeg.com 6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Settings available in the user mode: • The activation or deactivation of the rinse aid empty notification. • The level of rinse aid according to the required dosage. • The activation or the deactivation of the option AirDry. As the appliance stores the saved settings, there is no need to configure it before every cycle.
ENGLISH • The indicator off. and go • The indicator still flashes. • The display shows the current setting: e.g. = level 4. – The levels of rinse aid range from 0A to 6A, where0A means no rinse aid is used. 2. Press Start repeatedly to change the setting. 3. Press the on/off button to confirm the setting. 6.4 AirDry AirDry improves the drying results with less energy consumption. 11 CAUTION! Do not try to close the appliance door within 2 minutes after automatic open.
www.aeg.com manually. In other programmes, the setting of XtraDry is permanent and it is automatically used in next cycles. This configuration can be changed at any time. Activating XtraDry option deactivates TimeSaver. How to activate XtraDry Press Option until the indicator comes on. If the option is not applicable to the programme, the related indicator does not appear or it flashes quickly for a few seconds and then goes off. The display shows the updated programme duration. 7.
ENGLISH 8.1 How to fill the rinse aid dispenser A B 13 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator (A) becomes clear. C CAUTION! Only use rinse aid specifically designed for dishwashers.
www.aeg.com CAUTION! Only use detergent specifically designed for dishwashers. The basket is automatically locked on the upper level. Load or unload the basket carefully (refer to basket loading leaflet). 2. To lower the basket connect the release handle with the basket frame as shown below. Lift the release handle and the rack up. 1. Press the release button (A) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (B). 3.
ENGLISH 2. Press Delay again and again until the display shows the desired delay time (from 1 to 24 hours). 3. Press Start to start the countdown. • The delay indicator comes on to confirm the start of the countdown. • The countdown starts to decrease with steps of 1 hour. Only the last hour decreases with steps of 1 minute. When the countdown is completed, the programme starts and the indicator of the running phase comes on. The delay indicator is off.
www.aeg.com nozzles. Make sure that items do not touch or cover each other. • You can use dishwasher detergent and rinse aid separately or you can use the multi-tablets. Follow the instructions written on the packaging. • Select the programme according to the type of load and degree of soil. With the ECO programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. 10.
ENGLISH 17 11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 3. Remove the flat filter (A). 4. Wash the filters. 11.1 Cleaning the filters The filter system is made of 3 parts. C B A 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6.
www.aeg.com CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the upper spray arm 4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until it locks into place. We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 1.
ENGLISH • To maintain the performance of your appliance at its best, we recommend using a specific cleaning product for dishwashers (at least once a month). 19 Follow carefully the instructions on the packaging of the product. 12. TROUBLESHOOTING If the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table.
www.aeg.com Problem and alarm code Possible solution The program lasts too long. • Select the TimeSaver option to shorten the program time (if applicable). • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in the • This is not a defect. The appliance is working correctly. display increases and skips nearly to the end of program time. Small leak from the appliance door. • The appliance is not levelled.
ENGLISH 21 Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. • Plastic items may need to be towel dried. • For the best drying performance activate the option XtraDry and set AirDry. • We recommend to always use rinse aid, even in combination with multi-tablets.
www.aeg.com Problem Possible cause and solution Limescale deposits on the tub and on the inside of the door. • Clean the appliance with appliance cleaners which are particularly suitable for this purpose. • Try different detergent. • Contact the detergent manufacturer. Dull, discoloured or chipped tableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to basket loading leaflet. • Place delicate items in the upper basket.
ENGLISH 23 14. INSTALLATION There should be a minimum 2mm gap between the top of the dishwasher and underside of bench top Remove entire plastic membrane from sink trap spigot & fit drain hose to spigot with clamp The hose should not be extended by more than 2 metres or water pumpout problems may occur SINK Secure dishwasher with brackets or screws provided DISHWASHER Gap on both sides should be equal, & no greater than 5 mm per side.
www.aeg.com The water pressure must be in the limits indicated in the chapter ''TECHNICAL INFORMATION''. Make sure that the local water authority gives you the average mains pressure in your area. In order to pass the safety valve through the kitchen cabinets, an opening of at least 45 mm x 90 mm is needed. Parts. The extension length must not exceed 2 metres. The drain hose must be free of obstructions.
ENGLISH 2. 3. 4. 5.
www.aeg.com 9. To the extent permitted by law and subject to your non-excludable statutory rights and warranties, AEG excludes all warranties and liabilities (other than as contained in this document) including liability for any loss or damage whether direct or indirect arising from your purchase, use or non use of the Appliance. 10. For AEG Appliances and services in Australia, the Appliances come with a guarantee that cannot be excluded under the ACL.
ENGLISH 27 FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand FREE CALL 0800 10 66 10 OR EMAIL customercare@electrolux.co.nz (New Zealand only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in New Zealand FREE CALL 0800 10 66 20 OR EMAIL customercare@electrolux.co.nz (New Zealand only) 16. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it.
117881850-A-172017 www.aeg.
