FEE83700PM USER MANUAL EN User Manual Dishwasher
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................6 4. CONTROL PANEL....................................................................................................... 7 5. PROGRAMMES...
ENGLISH 3 manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. The ventilation openings in the base (if applicable) must not be obstructed by a carpet. Some dishwasher detergents are strongly alkaline.
ENGLISH new devices fitted (water meters, etc.), let the water flow until it is clean and clear. • Ensure that there are no visible water leaks during and after the first use of the appliance. • The water inlet hose has a safety valve and a sheath with an inner mains cable. • • • • 5 instructions on the detergent packaging. Do not drink and play with the water in the appliance. Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
www.aeg.com 3.
ENGLISH 4. CONTROL PANEL 1 2 8 1 2 3 4 5 On/off button Program button Programme indicators Display Delay button 3 4 7 5 6 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing phase operates. Drying phase. It comes on when the drying phase operates. End indicator. TimeSaver indicator. XtraDry indicator. Rinse aid indicator.
www.aeg.com 5.
ENGLISH Programme 7) Degree of soil Type of load Programme phases • Normal soil • Prewash • Crockery and cut- • Wash 50 °C lery • Rinses • Dry 9 Options • XtraDry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes). 2) The appliance senses the degree of soil and the quantity of items in the baskets .
www.aeg.com 6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Settings available in the user mode: • The activation or deactivation of the rinse aid empty notification. • The level of rinse aid according to the required dosage. • The activation or the deactivation of the option AirDry. As the appliance stores the saved settings, there is no need to configure it before every cycle.
ENGLISH – The levels of rinse aid range are from 0A to 6A where level 0A means no rinse aid is used. 2. Press Start repeatedly to change the setting. 3. Press on/off to confirm the setting. 6.4 AirDry AirDry improves the drying results with less energy consumption. 11 AirDry is automatically activated with all programmes excluding applicable). (if To improve the drying performance refer to the XtraDry option or activate AirDry.
www.aeg.com duration of some programmes, water consumption and the last rinse temperature can be affected. XtraDry is a permanent option for all programmes other than and need not to be selected at every cycle. In the other programmes the setting of XtraDry is permanent and it is automatically used in next cycles. This configuration can be changed at any time. Every time is activated, XtraDry is off and needs to be chosen manually. Activating XtraDry deactivates TimeSaver and vice versa.
ENGLISH 8.1 How to fill the rinse aid dispenser A B 13 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator (A) becomes clear. If you use multi-tablets and the drying performance is satisfactory, the rinse aid refill indication can be disabled.
www.aeg.com detergent on the inner part of the appliance door. 4. Close the lid. Make sure that the lid locks into position. When the countdown is completed, the programme starts and the indicator of the running phase comes on. The delay indicator is off. 9.2 Setting and starting a programme Cancelling the delay start while the countdown operates The Auto Off function When you cancel the delay start you have to set a programme and options again.
ENGLISH If you open the door before the activation of Auto Off, the appliance is automatically deactivated. 15 2. Close the water tap. 10. HINTS AND TIPS 10.1 General 10.3 Loading the baskets The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper.
www.aeg.com 10.5 Unloading the baskets 1. For improved drying results with the most efficient use of energy select the AirDry option, otherwise open the door by approximately 10cm at the end of the program. 2. Allow the tableware to cool for 30 40 minutes. 3. Hot items can be easily damaged, allow them to cool down before removing from appliance. 4. First remove items from the lower basket then the upper basket.
ENGLISH 17 11.2 Cleaning the upper spray arm We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 1. Pull out the upper basket. 2.
www.aeg.com 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. • To maintain the performance of your appliance, use a cleaning product designed specifically for dishwashers at least once a month. Carefully follow the instructions on the packaging of the product. • Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents.
ENGLISH 19 Problem and alarm code Possible solution The appliance does not fill with water. • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. • Make sure that the filter in the inlet hose is not clogged. • Make sure that the inlet hose has no kinks or bends. The display shows or . The appliance does not drain the water. The display shows .
www.aeg.com Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre. 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results.
ENGLISH 21 Problem Possible cause and solution Traces of rust on cutlery. • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close together. There are residues of detergent in the dispenser at the end of the programme. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dispenser. Make sure that the spray arm is not blocked or clogged.
www.aeg.com 14. INSTALLATION There should be a minimum 2mm gap between the top of the dishwasher and underside of bench top Remove entire plastic membrane from sink trap spigot & fit drain hose to spigot with clamp The hose should not be extended by more than 2 metres or water pumpout problems may occur SINK Secure dishwasher with brackets or screws provided DISHWASHER Gap on both sides should be equal, & no greater than 5 mm per side.
ENGLISH The water pressure must be in the limits indicated in the chapter ''TECHNICAL INFORMATION''. Make sure that the local water authority gives you the average mains pressure in your area. In order to pass the safety valve through the kitchen cabinets, an opening of at least 45 mm x 90 mm is needed. 23 Parts. The extension length must not exceed 2 metres. The drain hose must be free of obstructions.
117881840-A-412017 www.aeg.
