.\ A In selecting the FAVORITE Dishwasher you have acquired a top-class model of modem washing-up technique. You can be congratulated on this excellent choice. One of the most troublesome and unpleasant kitchen jobs is now a thing of the past, because now the FAVORITE will do the work for which you had to stand in the kitchen day after day.
List of contents Installation Connections Demonstration of operation Preparing the dishes Loading the dishwasher Detergents Water softening Wash programmed Care and maintenance installation or building-in and plumbing {hints for the expert) page 4 pages 4/5(6 page & page 6 page 10 page 13 page 16 page 17 page 22 page 26—33 3
Installation Electrical Connections Water inlet The FAVORITE dishwasher can be installed wherever electrical connections, water supply and drainage are provided, It ¢an also be incorporated in fitted kitchens or = in the case of the built-in model = it can be built into fitted kitchen units. For further derails 569 pages 28 (0 36, The appliance is mounted on two adjustable feet in the front and two castors at the back so that it can be moved, it necessary, by lighting the tron of the chine.
for plots of building land”. This stipulates that a vent and a non-return valve should be located in the water inter, whenever the tap itself does not contain these. The two inter valves of the AEG Dishwasher are fitted with automatic flow regulators which maintain a tow of about 5 liters {§ pints) per min. (direct flow valve) or about 1 liter (1.75 pints) per min. (re generator naive] when wale pressure is between 1 and 10 atm. (15150 Jbs per square inch).
Preparing the dishes The 6 settings of the programmer selector Be tore loading the dishwasher, remove insoluble and hard items, such as bones and the ke, starchy Left. overs from potatoes or porridge for example; also left-overs from spinach, coffee grounds, tea slaves, lettuce, cigars tie ash should be removed from the dishes.
Sk A9 1 Auto RESET mortise ok ans R servomotor 1200 s RsE P arranger st e RIS It you want to interrupt a programmer which has already started or if you want to change from one programmer to another, witch off the dishwasher by pressing in the selector switch, serest *1" and switch on again by pulling the selector switch out. The red line on the programmer indicator anal will now move quickly through all phases of operation and stop at "0". Now you can choose another programmer.
The FAVORITE is also protected against inadvertent opening of the door, As soon as the handle Js manipulated, the dishwasher is switched off even before the door opens. As soon as the door is closed and docked again, the Interrupted programmer continues automatically. To close the door, it is pressed firmly against the body of the dishwasher and the handier is pushed downwards. The programmer cannot of course be switched on wham the door is open. This is prevented by & special safety device.
This is how to load the FAVORITE correctly — only the cutlery basket has to be removed 10 Draw the lower rack forwards you until it stops. It is designed especially for larger items, such as plates, bowls and saucepans. Place large dinner and soup plates at the back on the right and on the Left with the eating surfaces facing the center, as shown in the frustration.
In order tv be able to arrange basins, large dishes, saucepans and scimitar items more easily, the racks can be lifted out completely, Always place basins and saucepans with the inside facing down, Adler loading the tower rack, glide it back as far as it will go. it wilt run further back automatically when the door is closed.
Good branded detergents are a prerequisite for the first-sass performance of the FAVORITE. Please use only the special detergents for family dishwashers offered by the detergent industry. Detergents for washing-up by band, even if they have similar-sounding names, are not suitable for automatic dish washing. You need two different washing agents: The detergent (powder) which helps the water to dissolve and remove food particles; and the clear.
Adding the detergent Adding the clear-rinse agent The detergent in powder form is put into the automatic release detergent container situated on the inside door panel on the right. After the detergent has been added, the Hid is closed by turning it anticlockwise. i the container happens to be clogged before the detergent is added, the Hid can be opened by turning the stop fever, in which case it opens automatically. Detergent: add 1 to 2 heaped tablespoons.
Make sure that you do not spill anything when refilling. or else excessive foaming may be caused during the next programmer. It is advisable to refill the clear-rinse dispenser as son as the level of the liquid is Just above the bottom edge of the indicator window, The quantity indicator is incorporated on the paneling on the deft hand side. It lights up as soon as the programmer selector switch is pulled out to start the dishwasher.
18 Water softening Each FAVORITE is provided with a water softening device which makes the washing-up water soft, neutralizing the calcium. This helps to improve the cleaning effect considerably, Calcium stains are eliminated and during the clear-rinse programmer a nice sparkier is dded to your glass and crockery. To keep the water softener operating effectively, you simply add besides the detergent a little common salt into the container provided under the lows rack each time you use the dishwasher.
The sat funner also provides a measure for the correct amount of salt: depending on the hardness of the water to be determined during the demonstration or gan be obtained farm the local water works, the following amount has to be added: Continental 269 English: 1 measure filled 10 the mark. abase 20° and up to 409d Continental 26—48° d English: 2 measures filed to the mark. Any common salt of a standard quality can be used. But commercial fine regenerating salts are also sui bate.
Programmer 2 Programmer 3 Programmer 4 plug in, or in the case of permanent connection, switch on main switch; hook drainage hose over the sink; pane water tap: select programmer: o switch on, pull out selector switch unit the red line on the programmer indicator panel slaves the “0” position. The quantity-indicator window lights up which means that the dishwasher is in operation. When the programmer is finished, the FAVORITE switches sell off.
Short programmer at about 50° C 1209 F Programmer § {or fitly soiled glasses. Add detergent and common salt. Dissect programmer "5”, This programmer has one warm and one void rinsing cycle, followed by heated clear rinsing and drying. “Pr-ringing programmer” — cold Programmer & for dishes which, before being washed, shall be kept wet in the dishwasher for a longer period, for example over night, so that food particles cannot dry on. Without detergent and common salt select programmer 6. .
Another few hints ‘Washing-up habits To use your AEG-FAYORIT as economically as possible, you should change some of your washing up habits, Always put used dishes immediately into the racks so that your kitchen always oiks Hdy. If you have a small family or not much to wash up, you can use your dishwasher economically by putting your tableware straight into the machine after cache meal and by waiting until it is fully cascaded before setting it irt aeration.
Silver cutlery Silver cutlery can be washed in the FAVORITE without hesitation. But it can get stains if it comes into contact with steel cutlery and in conjunction with the detergent solution. That is why the cutlery basket has a partitioning: do not put silver and steel cutlery into the same compartment of the basket. Silver cutlery can also tarnish when it comes into contact with certain sulfurous food particles, such as egg yolk or mustard, milady when it is kept exposed to air.
Care and maintenance Plastic Plastic dishes available nowadays are of very different quality and heal resistance. Those marked “fast to boiling” can definitely be washed in the FAVORITE, even at 85°C 150°F in the “standard programmer” (2). Other plastic articles should rather be washed in programmer *3" of “5%, in which case they should be placed in the upper rack. If you are in doubt, ask a specialized dealer whether your plastic dishes are heat-resistant.
Check the filter in the bottom of the dishwasher regularly to make sure that iris clean, This is done by removing only the cutlery basket, followed by lifting out the filter by its cross bar and cleaning It, if necessary, under running water and possibly with the help of a brush. When replacing the filter, see to it that the top edge rests firmly and tightly in the bottom of the cabinet. it Under no circumstances must the FAVORITE be put in operation without the filter.
2 If at any time there is anything wrong with your FAVORITE, please check the following points before you call the service engineer: I§ the dishes are not clean: Did you use a detergent which is suitable for dishwashers and did you use & sufficient amount? Did you flit the detergent container and close the Hd? @ Did you load the dishwasher correctly? #® Did the dishes perhaps block the sprayer arms 86 that they could not rotate? Did you use the per-rinse programmer where necessary, especially for heavily so
0 | 80AK DRY RINSE CRYSTAL. RINSE WASH WARM TINGE It is advisable to repeat this procedure if the hardness of the water in your area is above (20° d Germany 26° d English) or If you forgot several times to add common salt. But between the two operations you should run through programmer “6”.
Connection to hot-water supply system Installation or building-in and plumbing (Hints for the expert) For the superb washing-up result of the FAVORITE it s vital that there are two cold per-rinse cycles and Thai the cod washing-up water is heated up 1o a high temperature in the tub. As the cabinet is closed, the steam condenses on the crockery before the final temperature is reached. This steam treatment soaks and dissolves hard food particles particularly thoroughly.
As to the installation of the dishwasher under existing working substances, its height can be reduced from 850 to 820 mm. 33%:” 32'%” by removing the work top. The diagram on page 30 shows the dimensions of the Tree-standing model, (Page 29 for conversion table.) The model for bulling-in is supplied, ready to be built-in without work tap and with front facing angle strips instead of the side panels.
anciently tong continuous pressure hose which is resistant to pressure up fo 12 ati. {180 (bs P.S1. Approx.) if the drainage hose is too short for permanent plumbing, it can be extended with the help of a connection piece made from stainless steel, 4015 mm in) O, and with a sufficiently long hose having an inside diameter In). Also hose clamps 21/28 mm (1 In approx. aro required for this. Supply and drainage hoses can be bought by the meter (yard) from the local AEG Office.
which & bore has to be cut into the drainage hose {bore diameter not exceeding 8 mm). It in exceptional cases the drainage hose has to be connected directly to a drain pipe passing closely to the place of installation, an odorous seal must be provided, such as a standard-type bottle siphon, cup-shaped, approx.), 147 X 1% The siphon/drain pipe connection is sealed with a pinch washer 1%, 1t is most important that an air vent of some sort is incorporated.
