AEG In selecting the FAVORITE S Dishwasher you have acquired a top-class medal of modern washing-up technique. You can be congratulated on this excellent choice. One of the nest troublesome and unpleasant kitchen josh is now a thing of the past, because now your AEG FAVORITE will do the work that used 1o tie you to the kitchen day after day.
List of contents Installation and connections Demonstration of operation Loading the dishwasher Dish washing agents Water softening Wash programmed Care and maintenance installation or bulling-in and plumbing (hints for the expert) Conversion Chart {mm o inches) page 4 page 68 page 10-12 page 13—15 page 1617 page 1721 page 21-24 page 25~32 page 33
Installation Electrical Connection Water Supply The AEG FAVORITE Dishwasher can be installed wherever an electrical point, water supply and drainage are provided. H can be placed in fine with other Kitchen units or built into fitted Kitchen cabinets. For further details of the built-in model see pages 27031, The AEG FAVORITE is supplied for connection to hither 20V a.c. or 20V a.c. Total Voltage connected | Heating Fusing load 240V a. 0. 18or Amp 220Va.c.
When the dishwasher'ls permanently connected to the plumbing system, it is also important that the appropriate requirements for "Drinking water supplies for plots of building land" are observed. This stipulates that & vent and a nonreturnable valve should be located in the water inset, unless the tap itself is furnished whit these. The two int valves of the AEG Dishwasher are fitted with automatic flow regulators which maintain a flow of about § liters (9 pints) per min.
Preparing the Dishes Programmer Selector Switch Before Loading the dishwasher, remove inscrutable and hard items, such as bones for example and starchy left-overs of potatoes or porridge. Also remainders of spinach, coulee grounds, toa leaves, lettuce, fruit peel or cigarette ash should be removed from the dishes. Saucepans and other Kitchen utensils should be prepared far washing in the usual manner, 1 e.
FAVORITE s sy, 1 Bro wash ¢ 2 Standard rammed 2 non ¥ programmer. When the programmer is finished, the FAVORITE switches itself off. Depress the programmer selector to switch off the electricity (the light of the quantity indicator goes out. if you wish to interrupt a programmer which has already started or if you want to change over to another programmer, switch off, by depressing the selector switch, select another programmer and switch on again by pooling the sector switch towards you.
Motor Protection This is how the AEG dishwasher Nooks inside To close the door, press it firmly against the body of the dishwasher and push the handle downwards. The programmer cannot of course be switched on white the door is pane.
This is how to load the AEG FAVORITE correctly — only the cutlery basket has 1o be removed 1®° Draw the lower rack towards you until it stops. it is designed especially for large items, such as plates, basins and saucepans. Place large dinner and soup plates at the back on the right and let with the eating surfaces facing the center, as shown in the illustration.
in order to be able to arrange basing, large dishes, saucepans and similar items more easily, the right hand basket of the lower rack can be lifted out completely. Always place basins and saucepans with the inside facing down. After spading the lower rack, fet it glide back as far as it will go. It will then automatically be pushed further when the door is closed.
Good branded dish washing agents ar a prerequisite for the first-class performance of the FAVORITE, Please use only the special dish washing agents offered by the detergent industry for family dishwashers. Detergents for washing-up by hand, even if they have similar-sounding names, are not suitable far automatic dish washing.
Gauging the cleansing agent: approximately 2 heaped tablespoons. In the case of leas soiled dishes, less powder may be sufficient. You will soon find out which quantity you need for your dishes and for obtaining best results. Filling the Clear-Rinse An automatic dosing device for the clear-rinse liquid 14 Agent Container is built inch the inside door panel on the left. The container holds approximately 200 com clear rinse Guided which is sufficient for approximately 50 programmed.
Fill up with clear-tines agent only as far as the lower end of the slier tube {this corresponds to a level in the indicator about 1cm [z app] helot the top) Close filter cap tightly. Make sure that you do not spill anything during refilling, or else excessive foaming may be caused during the next programmer. ¥ you wish to try different clear-rinse agents, we advise you not fo fill the dosing device completely the first time so that you can try anther clear-rinse agent within a sheet period.
Water Softening Each FAVORITE is provided with a wale softening device which makes the washing-up water soft by neutralizing catechism. This hips to Improve the cleansing effect considerably. Calcium stains are eliminated and during the clear-rinse programmer & nice sparkle is added 1o your glasses and crockery.
The sat funnel also provides & measure for the correct amount of sat fo be added. The quantity depends on the water badness which can be determined when the dishwasher is installed and demonstrated to you. You can also obtain information regarding the water hardness from your local water works.
Programmer 1 Programmer 2 Plug in the FAVORITE or in the case of permanent connection switch on main switch. Hook drainage hose over sink. Open water tap. Select programmer. To switch on, pull selector switch, The quantity indicator window lights up, showing that the dishwasher is in operation. When the programmer is finished, the FAVORITE switches itself off. Depress the selector switch to switch off (the eight of the quantity indicator goes nut). Unplug or switch off main switch. Close water tap.
Short programmer Colloidal C (150° F} for lightly soiled dishes, painted china, glasses, crystal glass, and sensitive plastic items. Add cleansing agent and sat. Turn defector switch to “37, This programmer begins with two cold wash cycles which are followed by the clear-rinse and drying cycles. Programmed 1 2 3 Soak cold cold Pr-wash cold cold app. Wash cold (with cleansing agent) 1300 F app. Intermediate rinse a°c cold 8°F app. app.
When you have fished our medal, ail these things are already washed and dried by your FAVORITE. Unless it Is really necessary, try o avid swing excessively deep and large saucepans. This applies visa 1o basins and lags platters which take up much space in the dishwasher. tl is always advisable to use wo small dishes instead of a large one. if you buy new tableware, see 1o it that the shapes are suitable for the dishwasher, L e, straight, smooth walls and large openings.
However, you should see to it that slumming ware is not placed directly below the detergent dispenser because concentrated detergent might cause heavier staining. Patted China Co loured designs on china are generally made by “surface-glace painting” and to a smaller extent by “under-gaze painting”. But recently also highly heat resistant paints -are used for-crockery decorations: which are applied to the item after the first staving process.
Care and Maintenance dishwasher, dries at & high temperature, wooden articles should not be washed in the dishwasher. Care and maintenance of your FAVORITE is very simple. After you have used the dishwasher, close the water tap, pull out the plug or switch off at the main switch. {n this way you make sure that the dishwasher cannot be switched on inadvertently.
When replacing the sieve, see to it that its top edge rests firmly and tightly in the bottom of the cabinet. Under no circumstances must the FAVORITE be put into operation without the sieve, The heating elements of the FAVORITE are made of high-quality stainless steel. Occasionally you may find that they have turned dark, which however does not impair their quality or life span.
Connection to Hot Water Supply System Pr wash 2 Standard program ma 7 3 Short programmer advisable to repeat this procedure if the water hardness in your district is above 20° d {267} or whenever the salt has been forgotten on several occasions, in this case, however, programmer “1* should be carried out between the two processes.
It hot water from a central hot wale supply system or from other hot water, appearances is fed into the dishwasher, 10od particles soluble in cold water especially ogg white and starch, can burn on the dishes and leave stains which are difficult to remove. The FAVORITE must therefore be connected only o cold water supplies. 1. installation The AEG FAVORITE is very suitable for bulling-in or fitting into modern kitchens because with its hidden hoses it can be placed against the wall.
‘The mode for bulling-in is supplied ready for fitting, i.e without work top and with grant facing angle strips Instead of the side panels, if in a fitted Kitchen one side of the dishwasher is exposed, the right or left side panel can be obtained from your local AEG Office (side panel right: ET-No. 646 013 320; side panel left: ET-No. 646 013 330). The AEG FAVORITE is also provided with two slotted angle brackets to connect it with existing working surface.
if the drainage hose is too short for permanent plume bung, it can be extended with the help of a connection piece made of stainless steel, 40X15mm (122 In) fa, and with a sufficiently dong hose laving an inside diameter of 15mm (V2 in). Also nose clamps 21/23mm (app. 1 in} are required in this case. Supply and drainage hoses can be bought by the meter ({yard) from your local AEG Office. The same applies o suitable hose clamps, 21/28 mm (app.
82 must be fad at any point above this height, or else the water would flow out through the hiss by selfish, It is most important that an air-vent of some description is incorporated In the drainage system. The suggested method is for a fixed pipe larger diameter than the rubber hose and positioned so that the hooked end of the rubber hose can be placed into . See Frustration dn page 31. 3.
When pushing the appliance into place in fitted kitchens, special care has to be taken to make sure that the electrical lead and the supply and drainage hoses are free from Kinks and not squeezed. The above instructions for the permanent connection and building-in of the dishwasher are of course recommendations given 1o the technician as examples without obligation.
