User manual

Operating Instructions
34
After rectifying an Å10 or Å20 error, press the button for the com-
menced dishwashing cycle. The dishwashing cycle will continue.
If the fault is displayed again, please contact customer service.
3
For all other errors displayed, please contact customer service stating
the error code (see chapter: Customer service).
Two short continuously
repeated warning tones
can be heard, the cycle indi-
cator for the selected dish-
washing cycle is flashing,
error code
Å20 is displayed
in the multi-display.
The siphon is blocked. Clean out siphon.
The water drain hose
has not been correctly
laid.
Check hose installation.
Three short continuously
repeated warning tones
can be heard, error
code
Å30 is displayed in the
multi-display.
The leak prevention sys-
tem has been triggered.
Turn off the tap and contact
customer service.
Malfunction Possible cause Remedy