User manual
26
Switching off the dishwasher
When the dishwasher cycle has ended, the dot shaped light signal
below the door of the appliance goes out.
If the acoustic signal has been enabled, a continuous tone will sound
for approx. 15 seconds at the end of the dishwashing cycle.
With some dishwashing cycles, the drying fan continues to run even af-
ter the end of the cycle.
1 Carefully open the door. Hot steam may escape.
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for
about 15 minutes before removing them. You also get a better drying
result.
1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the water tap.
3 If the dishwasher is not switched off, then the acoustic signal is
repeated after 3 minutes and after 6 minutes.
Removing the dishes
3 It is normal for the inner door and the dispensers to be damp.
• Empty the lower basket first, then the upper basket. This way you
avoid dripping water from the upper basket onto dishes in the lower
basket.










