User manual

Installing the dishwasher

• The dishwasher must be installed on a firm floor and adjusted to en-

sure that it is stable and level in all directions.

• To compensate for unevenness in

the floor and to match the height

of the appliance to that of sur-

rounding units, extend the thread-

ed feet using a screwdriver.

• The drain hose, inlet hose and

mains cable must be laid so that

they are able to move freely within

the plinth area, and so that they

are not kinked or crushed when the

dishwasher is in position.

• The dishwasher must also be

screwed tightly to the work surface

or to the adjoining units. This is essential to ensure the dishwasher

does not tip up.

Dishwashers that can be fully integrated

(see installation template supplied)

3 The door of the appliance can be fitted with a wooden door/cupboard

door with the following dimensions:

Using the installation template supplied split cupboard doors can be

easily installed and firmly fitted.

Width: 591 mm – 594 mm

Depth: 16 mm – 24 mm

Height: max. 715 mm

Weight: max. 10 kg