User manual

Custom made kick-panel chart
40
50
60
40
50
60
70
80
90
100
100 130 140110 120
80 9070
a (mm)
b (mm)
X
X
600 mm min.
a
b
32 41 50 60 68 76 84 91 98 103 109
32 41 50 60 68 76 84 91 98 103 109
32 42 51 60 69 77 85 93 100 105 140
36 46 55 65 74 83 92 101 120 130 140
40 50
60
70 80 90 100 110 120 130 140
40 50
60
70 80 90 100 110 120 130 139
34 43 53 62 71 80 88 96 103 130 140
14.6 Water connection
Water inlet hose
Connect the inlet hose to a water tap
with an external BSP thread spout of
3/4''.
For best washing performance it is
recommended to connect the appliance
to a cold water supply.
Energy savings can be made by
connecting the appliance to a Solar
water system and using economy
options, however the water temperature
must not exceed 60° C.
Inlet water supply
• Water pressure: 800 kPa max - 50 kPa
min.
• Water flow rate 10 L / minute min.
• If water pressure is in excess of 800
kPa, a pressure reducing valve should
be used. Check for leaks.
• If water temperature is in excess of
60° C, a tempering valve should be
used. Check for leaks.
CAUTION!
Always use new hoses when
you connect the appliance
to the water mains. Old
hoses must not be used. The
water inlet hose must be
examined at an interval of
twelve months for
deterioration and replaced if
necessary.
The water pressure must be in the limits
indicated in the chapter ''TECHNICAL
INFORMATION''. Make sure that the
local water authority gives you the
average mains pressure in your area.
In order to pass the safety valve through
the kitchen cabinets, an opening of at
least 45 mm x 90 mm is needed.
ENGLISH
25