EN Dishwasher F87782M0P
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. CONTROL PANEL...........................................................................................................7 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • • • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not keep the appliance door open without supervision to prevent to fall on it. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.
ENGLISH 2.3 Water connection • Make sure not to cause damage to the water hoses. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. • The water inlet hose has a safety valve and a sheath with an inner mains cable. 5 • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed.
www.aeg.com 3. PRODUCT DESCRIPTION 1 2 3 11 10 9 1 2 3 4 5 6 8 7 Top spray arm Upper spray arm Lower spray arm Filters Rating plate Air vent 3.1 TimeBeam The TimeBeam is a display that shows on the floor below the appliance door. • When the programme starts, the programme duration comes on. • When the programme is completed, 0:00 and CLEAN come on. • When the delay start starts, the countdown duration and DELAY come on. • When the appliance has a malfunction, an alarm code appears.
ENGLISH 4. CONTROL PANEL 2 1 1 2 3 4 5 On/off button Display Program touchpad Delay touchpad MyFavourite touchpad 3 6 7 8 9 4 5 6 7 8 9 TimeSaver touchpad XtraDry touchpad ProBoost touchpad Indicators 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. 5.
www.aeg.
ENGLISH Water (l) Energy (kWh) Duration (min) P4 13.5 - 14.5 1.4 - 1.6 150 - 164 P5 13 - 13.5 0.7 - 0.9 60 - 70 P6 9.0 0.8 30 P7 4.0 0.1 14 P8 9.0 - 10.5 1.0 - 1.2 210 - 220 Programme 1) 9 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes For all the necessary information for test performance, send an email to: info.test@dishwasher-production.
www.aeg.com How to deactivate the rinse aid dispenser You can set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum quantity). Level 0 will deactivate the rinse aid dispenser and no rinse aid will be released. The appliance must be in programme selection mode. Factory setting: level 4. 1. To enter the user mode, press and How to set the rinse aid level The appliance must be in programme selection mode. 1.
ENGLISH • If options have been saved together with the programme, the indicators related to the options come on. 6.5 Acoustic signals Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to deactivate these acoustic signals. There is also an acoustic signal that sounds when the programme is completed. By default this acoustic signal is deactivated but it is possible to activate it.
www.aeg.com 7.1 XtraDry Activate this option when you want to boost the drying performance. With the use of this option, the duration of some programmes, water consumption and the last rinse temperature can be affected. The option XtraDry is not a permanent option and must be selected at every cycle. How to activate XtraDry . Press The related indicator comes on.
ENGLISH CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the lid locks into position. 13 If you use multi-tablets and the drying performance is satisfactory, the rinse aid refill indication can be disabled.
www.aeg.com appliance is in programme selection mode. 3. Press repeatedly until the display shows the number of the programme you want to start. The display will show the programme number for approximately 3 seconds and then show the programme duration. • If you want to select the MyFavourite programme, press . – The indicators of the options related to the MyFavourite programme come on. The display will show the programme number for approximately 3 seconds and then show the programme duration. 4.
ENGLISH the water released from the spray arm nozzles. Make sure that items do not touch or cover each other. • You can use dishwasher detergent and rinse aid separately or you can use the multi-tablets. Follow the instructions written on the packaging. • Select the programme according to the type of load and degree of soil. With the ECO programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. 10.
www.aeg.com 11.1 Cleaning the filters The filter system is made of 3 parts. C B A 1. Turn the filter (B) counterclockwise and remove it. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B).
ENGLISH 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 17 4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until it locks into place. 11.3 Cleaning the upper spray arm We recommend to clean regularly the upper spray arm to avoid soil to clog the holes.
www.aeg.com 12. TROUBLESHOOTING If the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. WARNING! Repairs not properly done may result in serious risk to the safety of the user. Any repairs must be performed by qualified personnel. With some problems, the display shows an alarm code.
ENGLISH 19 Problem and alarm code Possible cause and solution The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in the • This is not a defect. The appliance is working correctly. display increases and skips nearly to the end of program time. The options of the program have to be set again every time.
www.aeg.com Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. • Plastic items may need to be towel dried. • For the best drying performance activate the option XtraDry. • We recommend to always use rinse aid, even in combination with multi-tablets. There are whitish streaks or bluish layers on glasses and dishes.
ENGLISH 21 Problem Possible cause and solution Limescale deposits on the tableware, on the tub and on the inside of the door. • Refer to "The water softener". Dull, discoloured or chipped tableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to basket loading leaflet. • Place delicate items in the upper basket. Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13.
www.aeg.com 14. INSTALLATION There should be a minimum 2mm gap between the top of the dishwasher and underside of bench top The hose should not be extended by more than 2 metres or water pumpout problems may occur Remove entire plastic membrane from sink trap spigot & fit drain hose to spigot with clamp SINK Secure dishwasher with brackets and screws provided 820-880 mm 600 mm max 300 mm min DISHWASHER Gap on both sides should be equal, & no greater than 5 mm per side.
ENGLISH 23 14.4 Installing the appliance under a kitchen counter or to adjacent units 2. To adjust the front height of the appliance, turn the 2 front feet counterclockwise. The appliance has 6 fixing points: • 2 external fixing points (2 brackets + screws) • 4 internal fixing points (4 spacers + screws) Use the 2 external fixing points when installing the appliance under a kitchen counter or to adjacent units or if the opening for the appliance is greater than 600 mm.
www.aeg.com 14.5 Custom made kick-panel (for integrated appliances and full-stainless-steel door appliances) We recommend that you make a custom made kick-panel that aligns your kitchen cabinets. A notched continuous panel is necessary to prevent door swing interference and to keep kick-panel alignment with adjacent units. Using the 4 internal fixing points This operation must be done before the appliance is positioned under the counter. 1.
ENGLISH 25 Custom made kick-panel chart a (mm) b (mm) 40 50 60 70 80 90 100 110 120 130 140 40 50 60 70 80 90 100 32 41 50 60 68 76 84 91 98 103 109 32 41 50 60 68 76 84 91 98 103 109 32 42 51 60 69 77 85 93 100 105 140 34 43 53 62 71 80 88 96 103 130 140 36 46 55 65 74 83 92 101 120 130 140 40 50 60 70 80 90 100 110 120 130 140 40 50 60 70 80 90 100 110 120 130 139 X 600 mm min. a X b 14.
www.aeg.com Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. The appliance has a security feature to prevent dirty water going back into the appliance. If the spigot of the sink has a non-return valve, this valve can cause the appliance to drain incorrectly. remove the non-return valve.
ENGLISH 2. 3. 4. 5. Electrolux, at its discretion, to repair an Appliance during the Warranty Period; g) ‘Warranty Period’ means the Appliance is warranted against manufacturing defects in Australia and New Zealand for 60 months, following the date of original purchase of the Appliance; h) ‘you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and ‘your’ has a corresponding meaning.
www.aeg.com indirect arising from your purchase, use or non use of the Appliance. 10. For AEG Appliances and services in Australia, the Appliances come with a guarantee that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
ENGLISH 29 FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand FREE CALL 0800 10 66 10 OR EMAIL customercare@electrolux.co.nz (New Zealand only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in New Zealand FREE CALL 0800 10 66 20 OR EMAIL customercare@electrolux.co.nz (New Zealand only) 16. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it.
www.aeg.
ENGLISH 31
117896522-A-292015 www.aeg.
