User Manual

14 15
EX 150 E
.........................440 W
............4000-10000 min
-1
....................3,2/6,4 mm (1/8"/1/4")
......................ø 150 mm
..........................2,8 kg
...........................86 dB (A)
...........................97 dB (A)
..........................8,5 m/s
2
..........................1,5 m/s
2
ENGLISH ENGLISH
 
Rated input
No-load speed
Orbital travel diameter
Dimensions of grinding plate
Weight according EPTA-Procedure 01/2003


Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A))
Sound power level (K = 3 dB(A))
Wear ear protectors!
Total vibration values (vector sum in the three axes)

Vibration emission value a
h

Uncertainty K=


brochure. Failure to follow the warnings and instructions


SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing

Loss of

Appliances used at many different locations including open
air should be connected via a residual current device of


recommended to wear gloves, sturdy non slipping shoes

Always disconnect the plug from the socket before carrying




Before use check machine, cable, and plug for any


The dust produced when using this tool may be harmful to







SPECIFIED CONDITIONS OF USE

following work can be carried out with it: Coarse sanding
and grinding, Fine sanding and polishing, Rubbing down
weather-beaten paint, Polishing up scratches on acrylic

To provide the best adhesion, it is recommended that you
clean the backing pad and the sanding disc backing

Do not use this product in any other way as stated for

MAINS CONNECTION
Connect only to single-phase AC current and only to the

possible to connect to sockets without an earthing contact
as the design conforms to safety class II
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given




An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized

EN 60745-1:2009 + A11:2010
EN 60745-2-4:2009 + A11:2011
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
in accordance with the regulations
2011/65/EU (RoHs)
2006/42/EC
2004/108/EC
Winnenden, 2012-09-06
Rainer Kumpf
Manager Product Development

ADVICE FOR OPERATION
Only use original AEG sanding and polishing tools with

MAINTENANCE
The ventilation slots of the machine must be kept clear at all


components need to be replaced which have not been
described, please contact one of our service agents (see



printed on the label and order the drawing at your local
service agents or directly at: AEG Electric Tools GmbH,
Max-Eyth-Straße 10, D-71364 Winnenden, Germany
SYMBOLS
Please read the instructions carefully before

Always disconnect the plug from the socket
before carrying out any work on the

Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national
law, electric tools that have reached the end
of their life must be collected separately and
returned to an environmentally compatible

Class II construction, tool in which
protection against electric shock does not
rely on basic insulation only, but in which
additional safety precautions, such as
double insulation or reinforced insulation,
