User guide

10. PHONEBOOK
The unit can store up to 200 phonebook entries. Each phonebook entry can have a maximum of 24 digits
for the phone number and 12 characters for the name.
10.1 Store a Contact in the Phonebook
tFrom the home screen, press
.
tPress
to “PHONEBOOK” and then press to select.
tPress
to select “NEW ENTRY”.
>The screen displays “ENTER NAME”.
tEnter the name of the contact (maximum 12 characters) using the keypad.
tIf you make a mistake, press
to delete the last character entered.
tPress
to confirm the name entry.
>The screen displays “ENTER NUMBER”.
tEnter the number of the contact (maximum 24 digits) using the keypad.
tIf you make a mistake, press
to delete the last digit entered.
tPress
to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.
Note: You cannot store a new phonebook entry when the memory is full. In this case, you have to delete
existing entries to make space for new ones.
10.2 Access the Phonebook
tFrom the home screen, press
to open the phonebook list.
tAlternatively, from the home screen, you can press
, then to “PHONEBOOK”, then press
and to “VIEW ENTRIES”, then press to open the phonebook list.
>The phonebook entries are listed in alphabetical order.
tPress
to scroll through the list of entries.
tPress
P
to view the details of the selected entry.
tPress
to return to standby mode.
Note: Instead of pressing
to browse the phonebook entries, you can press the numeric key
corresponding to the first letter of the entry you wish to locate.
For example, pressing 2 will show the first entry starting with A. Pressing 2 again will show the first entry
starting with B, and so on..., and then press
to find the entry you want.
10.3 Modify a Phonebook Entry
tFrom the home screen, press
to open the phonebook list.
tPress
to select the entry you want to modify.
tPress
to open the phonebook menu options.
tPress
to “EDIT ENTRY” and then press to select.
>The current name is displayed.
tEdit the name using the keypad, using
to delete characters.
tPress
to confirm.
tEdit the number and then press
to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.