User guide

UK
8.14 Transfer an External Call to another Handset
tDuring the call, press
to put the external call on hold.
>Intercom is established immediately if there are only 2 registered handsets.
>If there are more than 2 registered handsets, the handset numbers which are available for intercom
will be displayed.
tPress the handset number you wish to call or press
to call all handsets.
Note: If there is no answer from the called handset, or you wish to cancel the intercom call before it is
answered, press
to return to the external call.
tPress
on the called handset to answer the internal call, where both internal callers can talk.
tPress
on the originating handset to transfer the external call to the called handset.
>The external call is transferred.
9. DIRECT ACCESS MEMORY
In addition to the phonebook memory, there are 2 direct access memories (Keys 1 & 2) on the handset. A
long press on the keys in standby mode will automatically dial the stored phone number.
9.1 Add Direct Access Memory
tFrom the home screen, press
.
tPress
to “PHONEBOOK” and then press to select.
tPress
to “DIRECT MEM.” and then press to select.
tPress
to “KEY 1” or “KEY 2” and then press to select.
>The stored name is displayed, or “NO NUMBER” if it is empty.
tPress
to enter the “DIRECT MEM.” menu to add/edit the name or number.
tPress
again to select “EDIT NUMBER”.
>The display shows the currently stored name or just “ENTER NAME” if it is empty.
tEdit or enter the name of your contact and press
.
If you make a mistake, press
to delete the last character entered.
>The display shows the currently stored number or just “ENTER NUMBER” if it is empty.
tEdit or enter the number of your contact and press
.
If you make a mistake, press
to delete the last digit entered.
>A confirmation tone is played.
tPress
to return to standby mode.
9.2 Delete Direct Access Memory
tFrom the home screen, press
.
tPress
to “PHONEBOOK” and then press to select.
tPress
to “DIRECT MEM.” and then press to select.
tPress
to “KEY 1” or “KEY 2” and then press to select.
>“NO NUMBER” is displayed if it is empty. Otherwise, the stored name is displayed.
tPress
to enter the menu options.
tPress
to “DELETE” and then press to select.
>“CONFIRM?” is displayed.
tPress
again to confirm.
>A confirmation tone is played.
tPress
to return to standby mode.