User manual

MAINTENANCE
26
Charcoal filter (recycling version)
This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or
at least once every 4 months. The filter saturation alarm has to be activated already before.
Activation of the alarm signal
• In RecirculationVersionHoods,theFilterSaturationAlarmmust be activated oninstallation or at a
later date.
• Pressandhold button E (Delay) for 5 seconds, until confirmation appears on the display:
 • Cflashestwice– Activated CharcoalFiltersaturation alarmACTIVATED.
 • Cflashesonce– Activated CharcoalFiltersaturation alarmDEACTIVATED.
Replacing the charcoal filter
Reset of the alarm signal
• Switch off the hood andthelighting.
• PresstheD-key until the display is unlit.
Replacing of the filter
• Remove the metal greasefilters.
• Remove the saturatedcharcoal filterbyreleasing the
fixing hooks
• Fit the new filter andfastenitin its correctposition.
• Put the metal greasefiltersintheir seats.
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Remove the 2 screwsfixing the Lighting support, and
pull it out of from the Hood.
• Extractthelamp from theSuppor.
• Replace with another of thesametype,making sure
that the two pins are properly inserted in the lamp
holder socket holes.
• Refit the Support, fixing itinplacewith the two
screws removed as above.