User manual

USE
24
USE
BUTTON DISPLAY FUNCTIONS
A Displays the set speed Turns the suction motor on and off
B Displays the set speed Decreases the speed of the motor V3 V2 V1
C Displays the set speed Increases the speed of the motor V1 V2 V3
D Displays HI The spot flashes Starts maximum suction speed. After 5 minutes the speed will return
automatically to the one set before. This function can be deactivated
by pressing the button again (the decimal point at the centre of the
display will flash).
E Displays the time remaining before
the hood turns off (countdown)
and the Set speed. The spot at the
bottom right flashes
Enables automatic delayed shutdown of the appliance (Delay), with a
delay that depends on the working speed set.
Speed1 delay20 minutes
Speed 2 delay 15 minutes
Speed3 delay10minutes
The proposed delay time can be changed by pressing the button succes-
sively and selecting one of the options available (5, 10, 15, 20, 25 and
30minutes).Attheendofthetimeselectedtheappliancewillturnoff
automatically. To deactivate this function, simply press the button until
theoption selectedis 0 or turn the motor off.
F Turns the hob lighting system on and off
Displays F Indicates the need to wash the metal grease filters. The alarm is triggered
aftertheHoodhasbeeninoperationfor100workinghours.Thisindication
is only visible when the motor is turned off. To reset the alarm:
Turn the motor off and press button D for approximately 3 seconds,
until the display turns off.
Displays C Indicates the need to change the activated charcoal filters, and also to
wash the metal grease filters. The alarm is triggered after the Hood has
been in operation for 200 working hours. This indication is only visible
when the motor is turned off. This indication must be activated following
the procedure described in the section on maintenance of the activated
charcoal filter. To reset the alarm:
Turn the motor off and press button D for approximately 3 seconds,
until the display turns off.