User manual

INSTALLATION

Drilling the Ceiling/shelf and fixing the frame

• Useaplumblinetomarkthecentreofthehobontheceiling/supportshelf.

• Placethedrillingtemplate21 provided on the ceiling/support shelf, making sure that the tem-

plate is in the correct position by lining up the axes of the template with those of the hob.

• Markthecentresoftheholesinthetemplate.

• Drilltheholesatthepointsmarked:

• Forconcreteceilings,drillforplugsappropriatetothescrewsize.

• Forhollowbrickceilingswithwallthicknessof20mm:drillø10mm(immediatelyinsertthe

Dowels 11 supplied).

• Forwoodenbeamceilings,drillaccordingtothewoodscrewsused.

• Forwoodenshelf,drillø7mm.

• Forthepowersupplycablefeed,drillø10mm.

• Fortheairoutlet(DuctedVersion),drillaccordingtothediameteroftheexternalairexhaust

duct connection.

• Inserttwoscrewsofthefollowingtype,crossingthemandleaving4-5mmfromtheceiling:

• Forconcreteceilings,usetheappropriateplugsforthescrewsize(notprovided).

• forCavityceilingwithinnerspace,withwallthicknessofapprox.20mm,Screws12h, sup-

plied.

• Forwoodenbeamceilings,use4woodscrews(notprovided).

• Forwoodenshelf,use4screws12g with washers 22 and nuts 23, provided.