User manual
9
EN
USE
BUTTON DISPLAY FUNCTIONS
A
Displays the set speed Turns the suction motor on and off
B
Displays the set speed Decreases the speed of the motor V3→ V2→ V1
C
Displays the set speed Increases the speed of the motor V1→ V2→ V3
D
Displays HI The spot ash-
es
Starts maximum suction speed. After 5 minutes the speed will return automatically
to the one set before. This function can be deactivated by pressing the button
again (the decimal point at the centre of the display will ash).
E
Displays the time remaining
before the hood turns off
(countdown) and the Set
speed. The spot at the bot-
tom right ashes
Enables automatic delayed shutdown of the appliance (Delay), with a delay that
depends on the working speed set.
Speed 1 → delay 20 minutes
Speed 2 → delay 15 minutes
Speed 3 → delay 10 minutes
The proposed delay time can be changed by pressing the button successively
and selecting one of the options available (5, 10, 15, 20, 25 and 30 minutes).
At the end of the time selected the appliance will turn off automatically. To
deactivate this function, simply press the button until the option selected is 0
or turn the motor off.
F
Turns the hob lighting system on and off
Displays F Indicates the need to wash the metal grease lters. The alarm is triggered after
the Hood has been in operation for 100 working hours. This indication is only
visible when the motor is turned off. To reset the alarm:
Turn the motor off and press button D for approximately 3 seconds, until the
display turns off.
Displays C Indicates the need to change the activated charcoal lters, and also to wash the
metal grease lters. The alarm is triggered after the Hood has been in operation
for 200 working hours. This indication is only visible when the motor is turned
off. This indication must be activated following the procedure described in the
section on maintenance of the activated charcoal lter. To reset the alarm:
Turn the motor off and press button D for approximately 3 seconds, until the
display turns off.