User manual

8
EN
RECIRCULATION VERSION AIREOUTLET
• Insert the connection extension pieceslaterally
14.1inconnection15.
• InserttheConnector15 intotheSupportbracket
7.3andxitwithascrew.
• Makesurethattheoutletoftheextensionpieces
14.1ishorizontally and vertically aligned with
thechimneyoutlets.
• Connecttheairoutletconnection15 tothehood
bodyoutletusingeitheraexibleorrigidpipe
ø 150 mm, the choice of which is left to the
installer.
• Ensure that the activated charcoal lters have
beeninserted.
ELECTRICAL CONNECTION
• Connect the hoodto the mainsthrough a two-
pole switch having a contact gap of at least 3
mm.
• Removethegreaselters(seeparagraphMain-
tenance) being sure that the connector of the
feedingcableiscorrectlyinsertedinthesocket
placedonthesideofthefan.
CHIMNEY ASSEMBL Y
Upper exhaust Chimney
• Slightly widen the two sides of the upper ue
andhookthembehindthebrackets7.2.1,making
surethattheyarewellseated.
• Securethe sidestothebracketsby usingthe4
screws12c(2,9x9,5)supplied.
• Makesurethattheoutletoftheextensionspieces
isalignedwiththechimneyoutlets.
Lower exhaust Chimney
• Slightlywidenthetwosidesofthechimneyand
hookthembetweenthe upperchimneyandthe
wall,makingsurethattheyarewellseated.
• Fix the lower part laterally to the hood body
usingthe2screws12c(2,9x9,5)supplied.











