User manual

7
EN
HOOD BODY MOUNTING
• Beforeattachingthehoodbody,tightenthetwo
screwsVr locatedon the hood bodymounting
points.
• Hookthehoodbodyontothescrews12a.
• Fullytightenthesupportscrews12a.
• AdjustthescrewsVr to level the hood body.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the
hoodtothechimneyusingeitheraexibleorrigid
pipeø150 or 120mm, the choiceofwhichisleft
totheinstaller.
To install a ø 150
• Toinstall the dumper 10
• Fix the pipe in position using sufcient pipe
clamps(notsupplied).
To install a ø 120
• Toinstall aø 120mm airexhaust connection,
insertthereducerange9 onthedumper10.
• Fix the pipe in position using sufcient pipe
clamps(notsupplied)
.• Removeanyactivatedcharcoallters.






