User manual

11
EN
Charcoal lter (recycling version)
Thisltercannotbewashedorregenerated.ItmustbereplacedwhentheCappearsonthedisplay
oratleastonceevery4months.The lter saturation alarm has to be activated already before.
Activation of the alarm signal
• InRecirculationVersionHoods, theFilterSaturationAlarmmustbe activatedoninstallationor
atalaterdate.
• PressandholdbuttonE(Delay)for5seconds,untilconrmationappearsonthedisplay:
 • Cashestwice–ActivatedCharcoalFiltersaturationalarmACTIVATED.
 • Cashesonce–ActivatedCharcoalFiltersaturationalarmDEACTIVATED.
REPLACING THE CHARCOAL FILTER
Reset of the alarm signal
• Switchoffthe hood and the lighting.
• PresstheD-keyuntilthedisplayisunlit.
Replacing of the lter
• Openthecomfortpanelspullingthemdownwards.
• Removethemetalgreaselters.
• Removethesaturatedcharcoallterbyreleasingthe
xinghooks
• Fitthenewlterandfastenitinitscorrectposition.
• Putthemetalgreaseltersintheirseats.
• Closethecomfortpanels.
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Removethe2screwsxingtheLightingsupport,and
pullitoutoffromtheHood.
• ExtractthelampfromtheSupport
.• Replacewithanotherofthesametype,makingsure
thatthetwopinsareproperlyinsertedinthelamp
holdersocketholes.
• RettheSupport,xingitinplacewiththetwo
screwsremovedasabove.