Operation Manual

27
d
GR
NL
F
GB
B
A
GB
Operating instructions
1. Connect the steam generator
iron to the mains supply. Press the
power button. When the power
switch is pressed, the power
indicator will illuminate. Wait for
one to two minutes, until the steam
lamp lluminates. Select the steam
level between Low - Medium and
High. See Ironing chart for ironing
recommendation.
2. if the lower water level indicator is
illuminated (A) (followed with two
beep sounds), rell the water tank.
After relling the water tank, press and
hold the rel reset button (B) for about
6 seconds. The rell reset button will
be extinguished. Steam can now be
used again.
3. To activate the steam, press the
steam button. When releasing the
button, use up the steam before
putting it back on the iron rest of the
steam station.
4. To turn o the iron by pressing
the power button for a while, until
a beep will sound. If the iron is left
unattended on the iron rest, it turns
automaticallyoafter10minutes.
5. Always cool the iron fully on the iron
rest before stowing away. Once the
iron is cool, empty the water tank.
Store the steam generator iron
6. Always store the cord winded safely
by the side of the iron. NEVER wind the
power cord around the iron