Installation guide
10
7.2 Answer a call
If the handset is not on the charging cradle:
tWhen the phone rings, press
to answer a call.
Note:
If “AUTO ANSWER” is set to “ON”, then lifting the handset off the base or
charger will answer the call automatically and no keys need to be pressed.
7.3 End a call
tDuring a call press
to end the call.
OR
tPut the handset on the base station or charger to end the call.
7.4 Handset speakerphone
During a call, you can press
to alternate between hands-free
speakerphone and normal handset use.
7.5 Adjust volume
There are 5 levels (“VOLUME 1” to “VOLUME 5”) to choose from for each
of the earpiece and speaker volumes.
During a call:
tPress
/ to select volume 1-5. The current setting is shown.
>When you end the call, the setting will remain at the last selected
level.
7.6 Turn off the handset ringer
In idle, press and hold # to turn off the handset ringer. The
icon is
displayed on the LCD.
Note:
The display will still flash the call icon
and show “CALL” or the caller
display number, when there is an incoming call, even if the ringer is turned
off. To turn the ringer back on, press and hold # again.
7.7 Turn on the keypad lock
You can lock the keypad so that it cannot be used accidentally while
carrying it around.
tIn idle, press and hold * to turn on the keypad lock and the
icon will
display.