Extra Information

ManualsBrandsAEG ManualsDomesticCOMPETENCE B 3100

Clock

Operating instructions

Dear Customer,

As part of a special manufacturing batch your cooker has already been fitted

with our new clock.

The setting of the time as well the operation of the pyrolytic self-cleaning

function (if fitted to your appliance) is somewhat different to the information

given in the instructions included with your cooker.

Please read how to operate these items in the following instructions.

Summary of content (4 pages)

PAGE 1
Clock Operating instructions Dear Customer, As part of a special manufacturing batch your cooker has already been fitted with our new clock. The setting of the time as well the operation of the pyrolytic self-cleaning function (if fitted to your appliance) is somewhat different to the information given in the instructions included with your cooker. Please read how to operate these items in the following instructions.
PAGE 2
Before using for the first time Setting the time The electronic clock display flashes after the electricity supply has been connected. A U T O 1 2 3 4 5 N5232_U You must now set the current time. To do this do the following: 1. Press button 4 M briefly. 2. Within 5 seconds, set the current time using the + or - buttons. The time appears on the display. The oven is now ready for use. Note: Every time the electricity supply is interrupted, all settings are lost.
PAGE 3
Cleaning and care Pyrolytic self-cleaning (if fitted) To do this do the following: 1. Set the function selection switch to the P symbol. 2. Set the temperature selection switch to P. The time and "PAUTO" are illuminated in the display. 3. Press button 2 <. "PAUTO" and 130 is shown in the display. 4. Within 5 seconds, set the cleaning time to 2 hours and 30 minutes using the + or - keys. The oven switches itself on and, at the end of the cleaning time, switches itself off again automatically. 5.
PAGE 4
Cleaning and care 3. Press button 3 >, and using the + and - keys set the time at which the cleaning process is to end. The oven switches itself automatically on and off. When the cleaning process is completed, the "AUTO" T symbol flashes. 4. Set the function and temperature selector switches to "0" and "Off" respectively. Setting the audible signal tone This clock can be used to set the frequency of the audible signal to 3 different tone positions. Proceed as follows: 1.